"Hi there. Is there like some kind of a camera on the ground to give it negative feedback or the camera is onboard the quadcopter to track its own motion?
Cheers~
Suan Ruey"
suanruey's Discussions
Gyro testing on APM2.0
Started this discussion. Last reply by criro1999 Feb 6. 1 Reply 0 Likes
Hi everyone. I had made a quadcopter and I had been testing it since June. It is made out of APM 2.0, Jdrones 20amps ESCs and 850kv motors, with the DJI frame set.It had only gone through one maiden…Continue
Quadcopter is flying in all four directions
Started this discussion. Last reply by Martint BuildYourOwnDrone.co.uk Aug 1, 2012. 3 Replies 0 Likes
Good day to all arducopter lovers, I'm a student from a uk university, and I am from Singapore. I had successfully built a quadcopter using the APM 2.0 flight controller, a motor and esc set from…Continue
suanruey's Page
Latest Activity
suanruey posted a discussionGyro testing on APM2.0
Hi everyone. I had made a quadcopter and I had been testing it since June. It is made out of APM 2.0, Jdrones 20amps ESCs and 850kv motors, with the DJI frame set.It had only gone through one maiden flight, and it had crashed a lot during the flight. Now, it is not able to fly properly and it fly in circles after throttle up. I had suspected it is one of those gyro problems.How do I go about to test whether the gyroscope had gone wrong? Moreover, is there any specific way to test that one of…See More
DistributorMartint BuildYourOwnDrone.co.uk replied to suanruey's discussion Quadcopter is flying in all four directions
"The floor might not be, and this coul dbe part of the issue i would take a look using a sprit level and make sure!
Regards
Martin."
suanruey commented on emile's blog post 5 flying modes with a Spektrum DX6i"Hi Emile. It worked perfectly, as compared to the previous setting. The 'Heli' setting made the flying very unstable since after a couple of crashes from the maiden flight. The 'ACRO' setting allowed a much quicker way to tune…"
suanruey commented on Andreas M. Antonopoulos's blog post ArduCopter 2.7 Released!"Im a pretty much a newbie to arducopter, and just setup a quadcopter about 3 - 4 weeks back. It will sound really odd, but how would one upload the new arducopter 2.7 firmware into our multirotor?
Regards
Suan Ruey"
suanruey commented on emile's blog post 5 flying modes with a Spektrum DX6i"Hi Emile. Thanks for the tip. I will try out the settings some time soon again. Will update y'all again on the flight.
Cheers"
suanruey commented on emile's blog post 5 flying modes with a Spektrum DX6i"Hi there. I'm a spektrum dx6i user as well, and im currently flying a quadcopter as well. I had set the flight configurations on the dx6i to the heli mode, and i don't seem to find the 'GEAR' mode available in the Setup mode…"
suanruey replied to suanruey's discussion Quadcopter is flying in all four directions"They are still pretty much straight. I always level the quadcopter before each flight now. The HUD also shows that the level is horizontal too when I placed it on the floor. The floor would be a level surface, isnt it?
Cheers
"
DistributorMartint BuildYourOwnDrone.co.uk replied to suanruey's discussion Quadcopter is flying in all four directions
"Hello Suanruey,
After the crashes / rebuilds have you checked that all the motors / arms / motor shafts are still straight?
Have you been through the setup and levelled the copter again in the mission planner? Was it off level?
What is the…"
suanruey posted a discussionQuadcopter is flying in all four directions
Good day to all arducopter lovers, I'm a student from a uk university, and I am from Singapore. I had successfully built a quadcopter using the APM 2.0 flight controller, a motor and esc set from Jdrones, and a F-450 frame. After all the proper configurations are done and built, the maiden flight was flawless and it was able to fly off properly at my nearby sports stadium. However, after the first flight and numerous crashes and repairs, the quadcopter was unable to take off stably. The…See More
Profile Information
- About Me:
- A Mechatronics Engineering Student at the University of Sheffield. Final year BEng student.
- Tell us a bit about your UAV interest
- i love anything tt is flying, and it's unmanned!
- Hometown:
- Singapore
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
ArduPlane User Group
682 members
-
Documentation Editors
51 members
-
Moderators
24 members
-
ArduRover User Group
184 members
-
ArduCopter Italian Group
87 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
