Hi, I need to know how to connect the telemetry from a pixhawk plate to a DeVention RX706 receiver and be able to observe the telemetry from a DeVention DEVO F12E receiver. Thank you.
Read more…Hi, could you tell me where to buy Li-Ion batteries safely and, preferably, can ship to Peru? Thank you.
Read more…Need help with keyboard mapping.
Equipment: Matrice 200, X4S and XT cameras, windows laptop, android tablet, just updated UgCS to version 2.12 and the UgCS for DJI app to latest version.
Problem: Cannot get the keyboard to control the camera gimbal. Do
Read more…I begin working on my DiY ground station and looking for a laptop ( soon to be dismantel to fit in the case) which shall not really exceed 11 inches screen.
Anyone tested the Hp Stream or any other brand with MP/Mavlink on Pixhawk and 3DR telemetry?
A
Read more…Hi,I received this message during final appoach on an auto landing "disable fence floor failed (autodisable)"FENCE_AUTOENABLE was = 2I aborted the landing and performed a FBWA landing.Looking at the source code this error is returned while trying to
Read more…I am using the jr XG7 transmitter and i have set the fail safe in the transmitter and receiver, though when i test the recommended tests i fail to pas test 3, i.e. ensuring flight mode changes to RTL or LAND when throttle is above zero!! I do pass te
Read more…After being very successful with APM2.6 on quadcopter I had plan to try a plane with APM but unfortunately I have not been able to find/download the Firmware 3.3.0 (the last firm ware for plane) to be used on APM, while the Firmware 3.2.1, which is t
Read more…Design something very cool using Composite Connectors. When you win, we send you everything you need to build it. We pick (1) design every month. Submit your #DIY design in any 3D CAD format and we will possibly pick your design. Email us here: conte
Read more…Can anyone help me to clarify this issue? I have found just tons of conflicting I format and the docs on the ardupilot wiki are not clear...
I am trying to use 6 servos with my pixhack ap... I am mostly following the docs for pixhawk being that from
Read more…What happen:
1.After succesfull PID tuning (manual) - pitch,roll, althold,loiter- rock solid but battery must change to continue tunning.
2. Landing, checking PID value. roll and pitch 0,2 P value
3. Changing battery
4. checking PID value - increase P on
We can now watch videos of prototypes of sectional nozzle propeller function in toy helicopter and wind turbines via the web-links below
https://www.youtube.com/watch?v=3Zr8rg6Cpjs
https://www.youtube.com/watch?v=w9oWwn7P1mI
Now I'm searching for intere
Read more…iSkyMaster is looking for Part 107 pilots across US for various projects.
Please contact me via IM, and please make sure to provide your name and phone number for a quick conversation.
Job posting can be viewed on Indeed as well.
Read more…Hello, guys, I am trying to make a FPV rover using apm 2.8(I think it is cloned from China)
and after I finished the hardware, the most important APM is not responding to the computer.
I powered the APM with 4.94v NIMH rechargeable batteries, but I do
Read more…Does anyone have a tarot 960 with a dslr and having reasonable flight times? I am getting really poor flight times and I need some advice regarding prop/motor/weight thanks you.
I am using a Pixhawk2.1, RoboClaw motor controller and Mssion Planner to control a rover. I have most things working well except for one issue I cannot figure out. The PixHawk outputs to the RoboClaw on channels 1 and 3 using skid steering. Regardl
Read more…
Luckily to get three free Tattu R-line 4s 95c Lipo battery, and I then I test it for my Walkera F210. The Tattu R-Line 4s 1300mAh batteryperformed very well, punch-outs are even more impressive than with stock battery. I could say that also flight ti
Read more…Set up is getting limited flight times and I only just get in the air and start to set up my shots and it is coming down.
Please throw me a line for help to improve this situation.
T960mm, 1755" props, 4114 320KV Tarot motors, 2x6000MAh 6s 25C Tattu ba
Read more…Hello
I am a junior RC aficionado, have been going into drone´s world for last two years.
I have performed my own quadcopter with Pixhawk as flight controller. In maiden flight, when drone was armed and I tried to take it off, motors went crazy and dr
Read more…Hello,
I am building a light weight foldable quad (550 size) with some options : telemetry, MavLink_FrSkySPort, 3 axis gimbal for the lightweight Runcam Split; based on a 3DR Pixhawk Mini.
Thus I am wondering if it is possible to acces Serial2 port wit
Read more…Hi,
I purchased PIxhawk 2.1 and it came with its own Power Module (power brick). I assembled and configured a quadcopter. When I connected the battery that is fully charged everything works fine. However, if the battery is not fully charged (voltage s
Read more…