$200 Wind Tunnel
Interesting...http://www.fi.edu/flights/first/makebigger/index.html
Read more…
2 Replies
All Discussions (33318)
Sort by
i search a telemetrie-modem 868 MHZ without duty cycle ...
hello,i want for attopilot a telemetry-modem.in germany ist 868 mhz alowed (2,4ghz is used by video).cam i used the xbee pro 868 with 10% duty cycle ??? ist that fast enouph ?it´s possible to hack this limit ?olli
Read more…shop proplem
helloI have a proplem in my store accountcan someone help me?I've already tried about 20 times and it is notI do not miss the shield kit from the shop since I built me a UAVwould likeMany thanks for your help
Read more…Telemetry / ArduPilpot
Hi there.Just starting to look into this. Have been using the Arduino for a number of things before.I am thinking of starting with downloading and displaying telemetry data and then later get into autopilotWith that in mind what should i get / do i n
Read more…(EM406 GPS LED glows faintly) - Fixing Start up sequence
I'm trouble getting the Ardupilot to talk to the GPS. At first, the GPS had a solid red light turning to blinking when outside getting a signal, but now all I get is a really faint glow of the LED. Could this mean I have a faulty module?Please could
Read more…Code Loading Problem w/EM406 GPS Attached
I have assembled the main board (328) and expansion board (shield) and connected them together. With the GPS attached to the expansion board I am unable to load the code (v2.2.2) from the IDE (Arduino v0016). I am only able to load the code if I remo
Read more…looking for aerial videos/image sequences
Hi,in order to investigate the potential of some vision application i'm looking for aerial videos taken with a downward facing camera.Preferably the video was recorded on board the plane so transmission didn't introduce error. Optimally the camera ha
Read more…shield kit
HelloI need a shield kit but had to buy it proplemecan someone for me the shield kit to buy and I pay the full pricewhich were very goodlg ludwigemail : RC@11ok.de
Read more…xyz sensor from sparkfun
Is this the right kind of xyz sensor for a UAV? https://www.sparkfun.com/commerce/product_info.php?products_id=847
Read more…How to send commands through rs232 using bsacom language?
I am really new to serial programming. I am having a MicroMag 3-Axis Magnetometer and I need to send a "go" command through the TX pin of the atmega 16 to the RX pin of the magnetometer so that it starts to send the data.I am programming in bascom an
Read more…ardupilot works even without the shield ?
Hellobecause I have a proplem that the shield kit to buytimes I wanted to ask whether the waypoint function and also the whole ardupilotwithout the shield kit worksif not someone for me a shield kit I can buy?or it may be someone for me to buy and I
Read more…Source for ELAPOR Foam
Hi all, Anyone have a source for ELAPOR foam used in the Multiplex models? Regards, TCIII
Read more…Help finding 1.0 software
Hi all,I downloaded the 1.0 code from repository and when I open it in the Arduino IDE the comments show it as v2.0 beta.I am a complete newb to this software and am attempting to use it for a ground based rover, and heard that the 1.0 software was m
Read more…magnetometer
hello....i am a newbie to uav...i am working on a uav project...and using a micromag 3 axis magnetometer ...with pni commboard...for getting the heading of the aircraft...bt i am not able to tilt compensate it...can anyone help me out on this ...pls
Read more…how about this plane
how do you think this plane will do as a uav? http://www.nitroplanes.com/sldieprtf.html Its looks very stable and is cheap
Read more…"on the fly" updates
Hi,Not sure if this is the right place for this post, but i have a question releating to comunications to a UAV while it is in the air. I assume via a ground station is the best way of doing this.What i would like to do is to send my UAV off on its s
Read more…Airframe ??
Hellomier now I want an airplane with adrupilot buildhere is my question, the mini mag from Multiplexand if so with or without aileronsor is that no matterludwig
Read more…Spektrum AR6200 or AR6100
Hi all, I presently have a Spektrum AR6200 receiver to use in my EZ* and TwinStar II with my Ardupilot. However, I was wondering if I should consider the AR6100 to conserve space in the fuse and not have to make room for two receivers? Is the AR610
Read more…Recovering from making the motor wires too short?
It's been a while since I've built a kit, so I made several mistakes while building the kit, and I wan't to know if I've recovered from them okay.First, what is the best way ot strip the wire provided for the motors? I didn't have a stripper that wou
Read more…Modular UAV airframe
Take look at this airframe http://www.vimeo.com/4576567Not pretty, but modular, parts are easily exchangable and the airframe is probably low cost.One could probably make an electronics container in light foam instead of mounting the electronics to t
Read more…