Hey guys, I am gonna make a simple 4-ch transmitter from a nintendo wiimote and basic stamp. I need to know if there is anyway to transmit the processed information via 72MHZ 4 channel to work with regular r/c toys. Do i need the inputs to be in anal
Read more…HelloI'm new here and have a questionwhere can I get the z sensor come from? is absolutely necessary?where's that?if it is necessary to go here?http://chebuzz.com/paparazzi/index.php?main_page=product_info&cPath=2&products_id=3ludwig
Read more…Hello Everyone.I am looking build a few sensors that will be connected to a laptop via USB interface, I am attempting to emulate a DYNON engine monitor. I have listed the sensors or data I wish to collect, does anyone have a direction on this ?? Than
Read more…Has anyone tried to mod the UAV DevBoard to use it as PTZ Gimbal Stabilizer?ThanksRyan
Read more…I'm working on a ATMega168 version of Ardupilot. I have added the airspeed sensor shield. As far as I can tell (from the leds and voltmeter readings) I have put it together properly. Today I downloaded Ardupilot software version 2.1.2. I did modify t
Read more…Hello all!I have long held an interest in UAVs but had no idea where to start. Man was I astounded when I ran across this site!My first UAV project will (hopefully) be appropriately simple. I want a very small, light UAV that can be hand launched, fl
Read more…Hallo an alle die deutsch sprechenich möchte meinen easy star mit einem ardupilot ausrüsten um ihn autonom fliegen zu lassen (an liebsten per waypoint)ich habe schon eine quadrokopter der autonom fliegt und jezt soll ein flieger herich suche jemanden
Read more…Hi everyone! I'm trying to build a tri-rotor (look at the attached picture) and I'm new at this...I don't know if there's some nice method to stabilize it but I was thinking about using an accelerometer and an MSP430 in order just to lift it and make
Read more…Hello all.Is there anyway I can purchase things from the store with a credit card without going through PayPal? Over the phone maybe? Please let me know.
Read more…The instructions say to cut a 6-pin male header for the ultrasonic sensor, but there it seems to need a 7 pin header (and 7 is what the picture shows.
Read more…Hi all,I am flying for two years now my UAV helicopter. Its equiped with the Carvec autopilot system. This gives the helicopter full autonomous flight. Next to flying the helicopter, its also stabilizing and controlling my onboard Sony Camera.The cam
Read more…I wondered if it might make sense to support both text (as it does now) and a "raw" TX method for the ArduPilot. With the "raw" mode you could save a few (possibly a lot as a %) bytes per transmission which could mean a faster rate of messages and le
Read more…I bought a new Ardupilot 328 boards and connect showing on the photo and I run 1.0 code and test code,But no matter how i switch chanel to control CTRL the mux dosen't work ? I don't know why??
Read more…I am curious if anyone has been able to transmit video through the radio modem itself. I have been doing aerial photography from UAS for over two years now but have had a seperate video transmitter and telemetry and radio control. Th eproblem is I us
Read more…I notice you mention the FMA sensors will be available in the diydrones store "mid june" - was that based on the late May shipment date on the FMADirect website? Did you guys get a bunch from that shipment that I'll be able to buy here, or we both no
Read more…Hi peopleI have this plane (http://www.mirax.cl/detalles.php?codigo=10153) with a Ardupilotversion 2.0.1, no Z sensor.I put some waypoints in the waipoints tab all with the same altitude (25 mts),but when I actuvate the autopilot, it does the mission
Read more…Has anybody tried controlling a Radio Control Car with the Ardupilot? If so how'd you go about it and were you succesfull?
Read more…I was going through Jordi's code and he talks about multiple "tabs". I've used Visual Studio (C#) for a couple of months, and have wanted an IDE that will let me do something similar with my Arduino, particularly with Jordi's code. But how do you do
Read more…Has anyone thought of hacking up one of the cheap laser rangefinders by Bosch or Stanley?Bosch's DLE 50 only weighs about 180g including it's own batteries (could be removed and powered by onboard powersupply).I am thinking of getting one of the unit
Read more…I'm building a UAV for a project. I have decided to buy the Attopilot for the autopilot system. I'm very new to R/C and i'm not sure what all to be looking at in terms of power supply, R/C reicevers, servo's and so forth. Can someone please help?Than
Read more…