Dear all,
does anyone of you know a solution to write the geo-coordates taken by an external GPS into the exif-header of an image when this is safed (not in post processing but at the moment the image is taken and safed to the SD-card)? I know that C
Read more…Servos not working on Pixhawk 2.4.8, Im using Flysky Transmitter and IA6B receiver, when I tried to calibrate I found none of the servos were working even after using the arming switch. But I used the same setup with APM flight controlle
Read more…Hi guys, I've been grounded for a while (due to a motor that I was too lazy to fix) but I'm back now, and I have questions.
I'd like to eventually make my current hexa-copter, into a coaxial 12 rotor machine; a dodeca-copter. I was wondering if anyone
Read more…Hi all,
I'm new to posting on the forums but have been reading your posts for a couple years now, thank you for all the great discussions and advice over the years.
I'd love to share with you all a project we've been working on, it's a low cost tethere
Read more…Hi all,
I just wanted to see/read your impressions about this simple camera I have created to do some simple conservation related/work.
The multispectral camera is based on the compute module of Raspberry Pi. Uses two raspberry pi cams with a M12 hold
Read more…I'mdoing line tracing research on pixhawk and Raspberry Pi4, but I'm stuck. Can you tell me a goot way or site?
Using: Raspberry Pi4, Pixhawk(PX4), Python
Thank you very much.
Read more…Hi,
I've just updated to the latest mission planner (version 1.3.42) and i was surprised to discover that the there is no more access to the "Full Parameters List".
I was kind of used to this list and it appears that some of the parameters aren't acc
Read more…First off I'm quite a newbie to electonics, I apologize, I'm still learning. I recently built my drone, it worked for the most part but the GPS caught fire. It turns out the set of wires that connect the pixhawk to the GPS module melted and burned ou
Read more…As a big thanks to all who have supported us through this tough year, we would like to give you special gifts this holiday season.
Let's discover special gifts and enjoy ongoing sales at Gremsy in this December.
SPECIAL GIFTS FOR THIS CHRISTMAS TIME
No
Hello Everybody,
As my first post in this community i want to share my Kicad library of the Pixhawk 2 Cube
i created for our own Lab projects.
As the Titel says it contains a Schematic Symbol split up into logic groups ( CAN, I2C, IO, ...)
as well as th
Read more…Can expert help me to analyze cause of crash, below is log file of crash?
https://www.dropbox.com/s/vbfj9poy4plergf/15-Dec-2020-Crash.BIN?dl=0
Not many people know but we have an piece of open source software for controlling an Antenna Tracker. It's been built by Tridge (Arduplane lead developer) for use in the outback challenge.
Sadly we have no documentation and, as far as I know, nobody
Read more…Hi,
I've recently put together a quad with DJI FlameWheel 440 frame, ESCs and motors and APM 2.0
I have few problems:
1. in Stabilize mode it's extremely difficult to hold altitude: when I slightly increase the throttle to avoid crashing the copter cont
Read more…Hello friends, I'm based in Africa but needs a coinventor or Angel investor based in USA or Canada who would endorse an NDA with me so that we can fast track 3D CAD, 3D computer simulation, manufacturing/funding and patent of a new concept of hybrid
Read more…Hi
Hope someone can help
I have a f450 frame with an arducopter 2.8 FC. I have set everything up (correctly, I think) and after going through the setup wizard, everything seems to be ok. I can get as far as arming but I cannot get the motors to mov
Hi,
new to the cube and have built a rover however I can only upload a mission but can't seem to get the Rover to move any help would be appreciated.
Read more…Throttle increases to about 10 percent - doesn't increase the speed of the motors
Throttle increases to about 10 percent. And then just going up doesn't increase the speed of the motors. ESC calibrated, Reggio calibrated.
PIxhawk 2.4.8 firmware 3.5 US
Hi all! I got this one with dead wireless module. Replacing a transmitter is a worthless idea. I wonder if it's possible to build something new using raspberry or kinda stuff. (i already have Pi3b+) Because i am from Russia, ordering from abroad is t
Read more…Hi guys, Im fairly new to this platform but would like your kind advice on one of the projects that i'm working on. I am currently working on adding a tethering system to the Dji s1000+ spreading wings octocopter to allow for 'unlimited flight time'.
Read more…Hi all,
I'm trying to revive a half dead Phantom 2 by moving it's parts onto a F450 frame. While all is almost operational, one of the motor seems to spin less so I'm thinking changin all the motors to a better ones so the drone could lit more weight.
Read more…