Hi All!
This is my first post to this forum, so apologies in advance if I submit this incorrectly.
I'm building my first quad and made the mistake of trying to use EMAX 12A simonk ESCs with my newly received Pixhawk. After reading several forum posts,
Read more…Hey everyone,
I’m new to the world of FPV. I would really like to build a ‘long range’ cheap FPV quad but I’m really a newbie in this domain. I would like to order the down-listed components but I don’t know if it is right. Can you'all please tell me
Read more…
It's the T-MOTOR Antigravity MN1005, ultra light version for the industry drone application. Weight: 255g each
Hover thrust: 3kg
Efficiency: up to 11.5g/wESC integrated inside~
So question
Read more…CAN ANY ONE TELL ME WHY BLHELI ESC IS NOT RESPONDING WITH BLHELI ESC WHERE AS IT IS WORKING FINE WITH TURNIGY ESC link of the esc http://www.rchyderabad.com/blheli20aesc.html
Read more…Hi All,I'm new to this hobby and l'm trying to build my first hexacopter based on an hobbyking s550 kit.https://www.hobbyking.com/mobile/viewproduct.asp?idproduct=76533The frame comes with EMAX BLheli 30Amps opto ESCs and I'm using a Pixhawk 4 autopi
Read more…Well first of all I'll start with the reason I chose to build this ground station instead of using a laptop
So after many times of carrying the laptop around assembling and disassembling parts and cables xbees usb cables and such I figured my laptop d
Read more…I have searched long and hard for how to use Emax Simonk ESC's with Pixhawk running the latest Arducopter. The problem is these ESC's have no response when connected to Pixhawk. From my research the native PX4 flight stack sends a 900us pulse at boo
Read more…Hello all!
I'm new where :)
I recently bought an taro 650 frame and all his components, and i'm joining together with marvelmind to get indoor "fake" gps.
I finally got that working, but the altitude is always wrong. In the marvelmind's dashboard the al
I'm having difficulties getting anything to work out of my i2c port. I talked to tech at 3d robotics and did a bunch of tests, we were unable to figure out the failure. I cannot get anything working from this connection on the board. Everything else
Read more…hi friends,
I have a strange issue with the Pixhawk 2.4.8
the Pixhawk board gets detected by the Win7 system and also by the Mission Planner when connected via the USB port.
but whenever I plug anything into the I2C port ( GPS / I2C Extender etc.) the W
Hi Guys
I want a quality Gimbal, i'm sure i'm not alone. I use an X8 carboncore with a Pixhawk but am reluctant to pay £2000 for a Z15 that isn't even integrated into my controller of choice.
As per the title,Does anyone know if 3DR are working on mar
Read more…On October 28-31, 2019, the 17th China International Public Safety Expo (CPSE) will be held at the Shenzhen Convention and Exhibition Center. With the acceleration of the construction of smart cities, smart transportation, and smart policing, drones
Read more…has anyone gotten this to work? Can I send video from my raspberry pi over the rfd900 serial link?
Read more…Hey forum folks, I need your help
Disclaimer: I know little to nothing about drones, and am hoping to crowdsource my learning to speed up the process, my husban is in the mail currently as I'd like to start my learning there. But here's the pipe dre
Read more…Good afternoon
I have a heavy copter I am building with T-Motor U8 (environmentally sealed versions for bad weather) and a T-Motor 70APro ESC connected up to 2*5S (aka 10S) battery supply.
My first problem was I could not get them to work with the Pixh
Read more…Can someone please confirm that Arduheli can be installed on 3DR Solo Cube without issues? Since they can be bought for cheap and are small and compact I'm looking at getting one for hobby project.
Before you ask, yes, I'm aware of all the hardware is
Simple question, but coming from my background, I have the passion to make my own, I'm just not sure if its feasible in this situation. I know a little about the ardu pilot, I am a self taught EE, with some Python, C, and CPP skills. While I love m
Read more…HiI have always had a power module between battery and power distribution. Is that a good idea on an S1000 or should the power module be connected to the PDB just for the pixhawk? I guess the ability to measure current is going to be the only issue b
Read more…
*RULES
Hey Here,
We are sincerely looking for the regional agents worldwide. The agents should qualified for the following requirement:
1. We have the simiar market and it would be great if you had some potential customers in our LiDARs' main application:
Ben
