arduplane 3.6 BAD_AHRS
hi
as soon I did update my pixhawk to arduplane 3.6 I got bad_ahrs messege
how can I fix it and why it is shows?
thanks
omri
Read more…
0 Replies
All Discussions (33321)
Sort by
Local AUVSI Chapter luncheon with speaker from FAA
AUVSI Twin Cities Chapter
Luncheon Presentation on FAA Part 107
Monday, August 8 at Devanni’s in Edina, MN
Presenter is Kevin Morris with the FAA
Mr Morris will speak on the new FAA UAS (drone) regulations
Kevin Morris
FAASTeam Program Manager, Operations
wireless charger
Good Morning I am looking to perform an automatic inductive charger which operates and recharges the drone without connections. Communicating with the APM so it can recharge the battery with the autopilot and programmable so that the drone recharge a
Read more…Replacing HRLV MaxBotics Sonar in PX4Flow with Lightware SF10 Lidar
Recently I replaced the HRLV MaxBotics Sonar of PX4Flow with SF10 Lidar . SF10 Lidar's range is 0 to 50 meters as compared to HRLV's 0 to 5 meter.
I managed to integrate the SF10 Lidar successfully but the values won't go beyond 9.9 meter although I
Read more…
High speed after change to auto mode on airplane with pixhawk .
Hello, I have problem with my plane, when I change to auto mode. He goes to right direction, but I used DO_CHANGE_SPEED to 12m/s and nothing change, the airplane flying about 18 to 25m/s.
Do you know about this problem?
Hugs
Connecting the antenna tracker through 433mhz radio
Hi. I've just made me an antenna tracker built on the pixhawk controller, the Ardupilot antenna tracker software(0.8.0) that I use together with Mission Planner. It kind of worked from the first outside test I made. The pan servo swings about 30 degr
Read more…Drone indoor navigation using Lidar
Hello
I have a drone with Pixhawk as its autopilot. I am trying to make it navigate indoors without colliding into objects. I am planning to use this Lidar. I want to know if there is a way to connect it to the Pixhawk. If someone could give me a deta
Read more…Views on new Flight Controller manufacturer TopXGun
Hi All,
I am currently in talks with TopXGun regarding the possibility of providing and supporting their products in the UK and Europe and would like your help and honest opinions, at present the user base is very small outside of their home country C
Can't Take off in Alt-Hold with a Sonar
I am using an IRIS+ running arducopter 3.3.3 with a MB1242 I2CXL-MaxSonar-EZ4 sonar and I am attempting to get the drone to hover indoors (I plan to add a px4flow as soon as I get this working). When I take off in Alt-Hold with the Sonar disabled (co
Read more…Navio2 Drone frame wings and other accessories
I want to assemble a drone, I have ordered a Navio2 Autopilot Kit for Raspberry Pi 2 / 3, and Pi.
I wonder what drone frame, wings and other mechanic accessories (that fit for the Navio2 Autopilot) I need to buy? do i need to buy a remote control, and
Read more…I DON'T LIKE UNBOXING DJI PHANTOM 4
I am a young drone flyer from Switzerland.
My first video was of course an unboxing, which I do not like so. 
Have fun
pixhawk safety
is there a problem with mission planner 3.3.39 and the safety button flashing yet motors arm and spin. Picked up my drone and motors spun causing me to be cut, yet the motors were unharmed.
Read more…Flying in ALT_HOLD using only sonar range finder
Hi, I am trying to fly my drone that uses APM copter as its flight controller indoor. I would like to disable both GPS and barometer and use only sonar range finder data as reference for altitude. Would somebody please tell me if it is possible and w
Read more…WayPoints issue in APM 2.8 Rover. PLEASE HELP
I'm having a bit of a problem with WayPoints, when creating WPs in Mission Planner and I send them up to the APM 2.8 and those are uploaded successfully, the issue is when I read the WayPoints back to confirm they are okay, most of them are off, show
Read more…APM sonar always shows 10 meters ( 5V ) evein if its not connected
i have apm 2.6 with quadcopter configuration .. it flies perfectly. but i wanted to add sonar to it for better altitude hold capabilities.. i have made the connections all right and also enables the range finder parameters correctly .. but no luck..
Read more…New drone app! where2fly
Hey fellow Drone Enthusiasts! I'm new to this forum and love all the information that's on here!! I wanted to introduce this project that I'm working on to this group. It's a free mobile iOS and Android app that allows users to share where they fly t
Read more…Telemetry radio link lost permanetly after changing settings in mission planner
Hello, im a relatively new user of ardupilot/misson planner. I'm setting up a new quad with apm 2.8 and sik telemetry clone modules from e-bay. Telemetry modules came working well out of the box, meaning i connected the ground module to the laptop, w
Read more…mission planner 3.3.39 safety button on but motors start up
I had my drone off with safety button flashing, picked it up and it armed and motors spun causing my finger to be cut. Is this a 3.3.39 problem with the safety button?
Read more…Pixhack
I'm building a Tarot frame quad rotor with a Pixhack autopilot. After successfully loading the firmware, the Pixhack is no longer recognized by Windows 10 when connected via USB. The drivers are loaded and present however. Any ideas?
I am also curi
Read more…APM 1.4 Antenna tracker
Hi guys, girls,
I have been searching the forum like a mad man...
I have been trying to use my old APM 1 system (see picture) 2013032108.49.00%5B1%5D.jpg to load the firmware for an antenna tracker (which I would like to build) I already acquired some
Read more…