Today I swapped in a Lemon Rx 8-channel, with PPM output in place of a Spektrum DSMX satellite RX. I tested and calibrated before sticking down the hardware with foam tape. The new receiver bound and connected on the first try. All of the other hardw
Read more…Hello,
I've been reading lots of forums and posts out there about RTK, affordable equipment like Reach RTK and Piksi, but Piksi seems it requires lots of configuration and according to some posts lots of things could go wrong, and as for the Reach RTK
Read more…HI all,
Today I swapped a Spektrum DSMX satellite RX for a Lemon RX 8-channel, with PPM output. I tested and calibrated before sticking down the hardware with foam tape. The new receiver bound and connected on the first try. All of the other hardware
Read more…Hi, I'm a newbie configuring a Rover to follow waypoints, i'm using a Pixhawk + 3DR GPS to guide it, and it does a good job overall but I'm trying to understand why my rover isn't going in straight lines rather than weaving all over. I'm getting 14 s
Read more…Dear Diydrone members, I am stuck and I really hope that one of you might be able to help me. As indicated in my previous post I am able to successfully build and fly a 450 size electric heli. I have a 50 size nitro heli and I wanted to make it aut
Read more…I did an update from Windows 7 to Windows 10 and now I am having problems with the HUD Display missing in Mission Planner. Also, I have to go to Task Manager to close Mission Planner too.
Attached is my current Mission Planner display in "Flight Data
Read more…I am using APM and CHDK with a SX260 to do mapping. I have had reasonable success but would like to improve my output. 3 issues:
1. I am using distance triggering via mission planner and auto survey grid with advanced settings. When I look at the s
Read more…I have a hawk with a bad usb bus. Neither the onboard nor the external USB ports work and it came with 3.3-Dev installed on it. Can I flash the latest firmware via SPI and a USBAsp?
Read more…Hi Guys I´ve written a simple python script, which activates a particular RC output (RC5 in this case) to set a connected servo to a specific angle, waits 2 seconds then to another angle then repeats.
Everything works perfectly in Manual mode.The serv
Read more…Does anyone know if it is possible to stitch aerial thermal imagery without losing radiometric temperature data? I am looking to generate a thermal orthomosaic.
Read more…Hello Guys, im new in the forum, but flying with Pixhawk for two years with several platforms both fixed and rotary wing.
Im very used to in the setup, but now i have a hardware problem that i now can be solved with a customized firmware, unluck i don
Read more…Hi there,
Can a Maxbotic I2C Sonar EZ4 create interference on my equipment Compass, GPS, Telemetry, and RX from RC if installed near them?
Thanks.
I have suddenly developed major jitter on the extreme ends of the aileron output from my 3DR pixhawk. I have checked the servos and leads with a servo tester, furthermore the ailerons function normally when plugged directly into the RX, All other ch
Read more…Hi guys,
I'm trying to do a project where I use a 3 position switch to control 3 different states of some auxiliary hardware on my plane. I plan to set this channel to passthrough, but I need to implement some timing logic. Specifically, I want to be
Read more…Hi, I was wondering if there is a drone that is out there for perhaps under 3 or 400 euros that is ideal for beginners? Having a camera is not so important, but what would be ideal is the ability to transport very small, light objects. Any suggestion
Read more…Micro sized Ethernet switch for sale.
http://www.gadgetsmyth.com/product/ethos-lite/
Cables included.
120 USD paypal + fees shipping worldwide
PM me.
Whats the best way to on the fly control speed or velocity? I've been in guided mode and using the simple_goto to follow a leader but it simply isn't updating it fast enough or correctly. If I am constantly receiving the leader's location and velocit
Read more…Sorry for the broadcast nature of this, but hoping I can connect with someone quickly on this. I am eventually hoping to have aerial contour survey capabilities on my ArduPlane-equipped MyTwinDream, and/or a to-be-built multi-rotor running ArduCopter
Read more…I sell 4 pcs Piksi. We used them for some lab testing and evaluation - they are like brand new.
If someone is interested, please PM.
Cheers
Christof
Read more…Hi! Yesterday i encounter some issue and wish to seek for anyone who can clear my question.
I tried to do a very simple mission using mission planner(Take off -> waypoint 1 -> RTL). The distance to waypoint 1 is less than 5 meters away. I did a manual
Read more…