Hi,
i wanted to build a new vehicle together with my son and wanted to buy new AUAV board but the site link to it - http://www.auav.co/product-p/auavx21.htm - says to expect something good - ? - and there seems to be no activity at all.
it is a pity,
Read more…Hi! I want to share the telemetry of my PIXHawk 2 with a microhard telemetry 900 Mhz Bridge (no 3dr , no RFD), anyone have some suggestions about the configuration of the modem for streming mavlink messages?I tried to use microhard modules p400 ... t
Read more…I need some input....
I'm trying to convert one of my current air frames into a VTOL platform and I'm looking for recomndations for motor and prop combos.
My air frame is a Foamaroo: Roo Link
I'm trying to pick up about 1500 grams without a battery an
Read more…Hello,
I have a couple of questions about the iOSD + A2.
I am thinking of running an A2 and iOSD without it being attached to a UAV. I have a spare A2 for my S1000+ (don't ask how I ended up with a spare one) and intend to use it on a helicopter as I
In order to meet the user's requirement in harsh conditions, we newly added IP65 level waterproof shell to TFmini! In addition, the switching value function is also added. First, let's take a look at the changes in appearance
Left one is the updat
Read more…About Stator Bonding Lamination/ Bonding stator
Stator bonding also called glued stators lamination or bonded stator lamination. how to do it and what is the advantage of this technology?
As we know, all of the motor engineers would like to design the
Read more…Bonjour à tous,
Je suis en train de monter une aile volante avec un apm 2.8 et télémetry.
J'ai pratiquement tout câblé et paramétré, mais je n'arrive pas à créer les modes de vols.
je souhaiterais uniquement 3 modes sur 1 inter.
J'ai un récepteur 6 ch.
j
Read more…TFmini now upgraded to new version with IP65 protection. More details below:
"In order to meet the user’s requirement in harsh conditions, we newly added IP65 level waterproof shell to TFmini!
In addition, the switching value function is also added. F
Just unpacked a new 3s 1500mah LiPo I ordered from banggood. It arrived a month or so ago, but I only now got around to using it. I also got a second identical battery at the same time, which is fine.
Upon hooking this one up to my B6AC charger, I w
Read more…More ideas and applications for UAVs.
http://www.nrcresearchpress.com/journal/juvs
Read more…Hello
I have tested the 2 Arducopters with ESP-07 WIFI modules using UgCS .
I saw the ESP-07 range testing article and thought for the control/communication range to +150 meter.
but UgCS lost the telemetry donwlink/uplink in about 30m altitude in my t
Read more…'I have a Pixhawk Cube without Edison, Frsky X8R/Taranis X9D+ , trying to use Flight Deck Telemetry. I plan on connecting 2 Odroid Xu4 companions with FLIR and 2 cameras for Computer vision. But that comes later...I seem to have some difficulty gett
Read more…I have a Pixhawk Cube without Edison, Frsky X8R/Taranis X9D+ , trying to use Flight Deck Telemetry. I plan on connecting 2 Odroid Xu4 companions with FLIR and 2 cameras for Computer vision. But that comes later...I seem to have some difficulty getti
Read more…Dear friends,
I tried everything: you tube videos, swapping Rx-tx wires, hacks, etc., and even though the external compass is a great success (I'm happy and proud), "No GPS" continues showing in the Mission Planner.
This particular GPS/ compass is HMC-
Read more…Hello
I will use in a plane a DYS BLHeli 40A Opto. I've never used this type of ESC and I've seen a lot of discussion about it. Should I take some care? Any configuration tips?
Thank you!!
Read more…Hi all, my team keeps experiencing an altitude drop of about 10-15m on our quadplane when it transits from VTOL to fixed-wing mode.
My teammate and I have opened discussion posts on the ArduPilot forums, where most of the details for our attempted deb
Read more…Hi
Antenna trackers have been around for several years now using their directional antennas.
Now i have an idea to make an GCS tracker to mount on a plane/copter so i can mount a directional antenna on my drone as well. Lets say maybe just a servo that
Read more…I am working on a project to build a quadrotor using RPi Zero W as flight controller. It has 2 main parts.
1) Recieving RC signal (FS-R6B AFHDS 2.4GHz)
2) Feeding that signal to 4 ESCs(12A Emax BLHeli) then to Brushless motors(2300kv ReadytoSky)
If I'm
Read more…This is my first time creating a thread and i'm looking for possible gps tracking devices for my mavic pro platinum drone. i don't wanna waste my money again in losing another drone. Thank in advance for your help!
- Donna
Hi,I’m working with a pixhawk, and I am not getting any readings in any of the adc input pins (13, 14 and 15) where I have connected an analog sensor.I tried running the ardupilot AnalogIn example, and I get all 0. I don’t think the sensor is the pro
Read more…