Will the pelter suit affect drone flying?
I bought it several days ago at hobbyinrc, first time to test it, drone works normally now, but worry if it affects flying for a long time.
Read more…
3 Replies
All Discussions (33321)
Sort by
LED propellers affect balance of drone when flying
I changed LED propellers for DJI Phantom 4, but heard that it affects drone's balance, and smell burning when fly long time, is it true?
I tried fly several times, it works as normal.
Do you have any experience about led props?
Read more…PDB setup for a twin rotor plane using a quad rotor PDB
Hello all,
I'm very new to drone building, and have set myself a challenge of creating a twin motor fixed wing plane. I will be using two batteries, and as the title suggests, two motors and hence two ESCs. For this purpose I decided to purchase a PDB
Read more…APM HELP
I am using APM 2.8 with S500 frame kit, Multistar 2216 800kV, Turnigy Plush 25A ESC, Frsky Fsi6a TX, RX
The motors run ok when connecting everything to mission planner for testing. But when USB is unplugged, the whole setup does not respond anymore, t
Read more…Drone takeoff automatically & irregular descent
Hi :)
I have 3 identical drone with pixhawk, at the factory settings and one of them, when I arm my engines in position mode, takes off alone. Is there a parameter for this?
And when the drone lands, it is difficult to detect the ground, so it takes of
Read more…How to set FOLLOW FRAME YAW for the SimpleBGC32- Alexmos Gimbal through ARUPILOT wiring and configuration
Dear All...
I'm using the gimbal ARRIS cm3000 (SimpleBCG32-Alexmos). I'm practice the wiki of ardupilot which is about gimbal connection --> (http://ardupilot.org/copter/docs/common-simplebgc-gimbal.html#common-simplebgc-gimbal).
During the BaseCam Sim
Read more…Just built a FPV racing drone, trying to figure out how to debug problems
Hi,
I need help debugging my drone to get it working for the first time.
I just attempted to build my first drone from a recommended build by uavfutures on youtube (part list below). It's all soldered together, but when I turn it on, things aren't goin
quadcopter ESCs and servos ?
Hello,
Does anyone have experience with controlling ESCs and servos on a quadcopter with a Pixhawk Mini FC (in combination with QGC), a Spektrum DX6i transmitter and Spektrum Satellite ('Remote') receiver ?
Simply connecting a servo to the 6th output o
Read more…Underwater Drone Market Research - anonymous and short!
Hi everyone! I am currently designing an underwater drone for a university project and I am looking for some data on the market for these devices. I was hoping that some of you would be willing to fill out a brief (less than 5 minutes) survey for my
Read more…flysky fs-i6a transmitter
hello, i,m just a beginner with fpv i,m having problems with upgrades for my flysky fs-i6a transmitter all the upgrades i find are 2 or more years ago and don't work can anyone tell me a up to date upgrade please thank you
Read more…python script to run mavproxy
Hello
i am student working in a project with UAVS, so i am trying to load waypoints to my Pixhawck from an script which runs on my RPI,connections are fine bc i can upload fine the waypoint from command console
i can list the waypoints and its done cor
Read more…Problem with internal magnetic sensors PIXHAWK 3 PRO
Firmware v1.7.3 & QGC v3.3.0
During test flights I noticed that the drone does not fly the route I specified, but always flies in any other direction. Several times I recalibrated all sensor systems with QGroundControl and still got the following war
ROV thruster with DT700 motor 4.78 kg trust
We developed high-efficient thruster with superior performance from an inexpensive but very popular DT700 brushless motor. Ideal DIY thruster for ROV MATE. It's more efficient and powerfull than Blue Robotics T200!
SPECIFICATIONS:
Tested forward / reve
UAV Generated Point Cloud Classification to making DTM
hello guys, do you have tutorial to make dtm from UAV in global mapper? thanks
Read more…Pixhawk 2.4.8 althold jump
Hi everyone!!
I have a problem with my quadcopter, i use pixhawk 2.4.8 with fw 3.5.5 and in althold the drone jumps quickly up and down. Below the barometer is already present the sponge. Someone can help me? Thanksss
FPV Videos & Legality
I'm new to RC modeling, but I've taken an interest in the laws and regulations as they apply to me in Canada. I've also been watching FPV videos and digging into what other people are doing for builds, and I've got to ask - are all of these guys fly
Read more…Can someone give some recommendations ？I want to get the tree count, height and crown diameter per individual tree from point cloud data (*.laz, about 12gb) of a forestry plantation.
I have point cloud data (*.laz, about 12gb) of a forestry plantation, it has 4 trees species and I have a shp file with this info and with the polygons. My goal is get the tree count, height and crown diameter per individual tree and get the wood vol
Read more…Can anyone offer advice on making the 3DR SiK Data Radio work with a Windows 10 Tablet please?
Can anyone offer advice on making the 3DR SiK Data Radio work with a Windows 10 Tablet please?
3DXR.co.uk say I have the correct CP210X driver.
There is NO yellow warning triangle on the driver in the Device Manager.
(I had to Disable Driver Signing t
wireless GPS data transfer through MAVLINK and PIXHAWK
Hello everyone
I'm facing the following problem: a stationary (on the ground) GPS + an arduino MEGA + an RF link at 433MHz configuration, produces, parses, recombines and transmit through the RF its GPS position in the format:
<ID,11.111111,22.222222,
Read more…Spektrum DX6 Transmitter Mixing for 6 Pixhawk Flight Modes
Could someone please help me figure out how to setup some mixing on my Spektrum DX6 transmitter? I want to support 6 modes from the transmitter and will need to emit PWM widths of around 1165, 1295, 1425, 1555, 1685, and 1815 milliseconds. I'm trying
Read more…