Hello,I need your help!Some weeks ago, I installed successfully Labview runtime.But now I cannot launch it anymore !!!I don't now how to launch it again.In "C:\Program Files\National Instruments" folder I don't see any executable file. How can I run
Read more…I've been trying to contact Dean at attopilot for over a month now but to no avail. Are attopilot units still on sale? I've seen here at DIY that an IMU based attopilot may be coming out in the future. Does anyone know any resolution on that release?
Read more…For the motor contorller (quad half-h driver) I notice in the shipping kit and in the published schematic, you use the L293D, but in the parts list you mention the SN754410NE. Why did you switch? Was there a problem with the SN754410NE?Thanks,-- Mitc
Read more…Hey guys, I've been wanting to make a UAV heli for a while now, finally taking the plunge with a plane first. I am going to start off with either an easy star or easy glider. I noticed some of the easy star kits come bundled with a very basic transmi
Read more…Im completly new to all of this. Ive been googling and reading for days. Im trying to find information on a Ducted Fan UAV like the militarys MAV drone. I would like to build one from hobby parts but i have no clue on where to start what hardware i w
Read more…Hello,I'm having trouble getting proper readings from a Parallax Ping. I've followed the tutorial on the Arduino site with no luck.The problem I'm having is the readings in the serial monitor are mostly 0in or 4in. It never changes with different dis
Read more…can someone give the link to ardu software for gps auto pilot that is located on diy drones?
Read more…Heya Amigos, I'm an archaeologist using aerial photography to document archaeological sites around the world. It is really inspiring to see all the innovation taking place here!I fly both blimp and kite aerial photography rigs and create 3D photogram
Read more…After many hours of research and invaluable input from people on DIY Drones, we settled on the Easystar with the Easyglider wing for our AP platform. We plan on modifying it to look something like the modification discussed here,http://www.rcgroups.c
Read more…I've never soldered or worked with bare metal before and thought this might be a good pedagogical project. I bought the a Weller WLC100 and some SchmartSolder. My first attempt I set the unit to 5 (max power), waited a minute, set it to 3, waited a m
Read more…
I'm new here, but I would like to get some help for my Engineering Capstone Project. I'm designing a UAV (about a 7-8ft wing span) I'm working on sizing and the propulsion and stuff right now which is the main part of my design project. What I would
Read more…How do you connect the Blox GPS receiver to the Ardu controller?. I can not find any wiring instructions.Antonio
Read more…Hi, I'm very new to the UAV scene. I was interested in buying a plane that would give me a flight time of well over 1 hour and still have a payload capability to support a camera,GPS, and transmittor (for video streaming and controls). It seems hard
Read more…I currently have a Seawind model that is remote controlled. I was wondering if anyone had any input as far as recommended components or methods. This project is difficult because of the autonomous water landing, which I am also interested in hearing
Read more…Hi. I'm fairly new to this whole fun, and think I need some help.I am using an ArduPilot with an R/C truck for learning. But I can't get the code to load at all, so learning the code side hasn't started yet.My set up:- ArduPilot (the red one).- An Em
Read more…For those of you who have read the comments in my other thread: http://www.diydrones.com/forum/topics/yadiya-yet-another-diy , I'm considering using two dual axis gyroscopes from ST Micro. I need a gyro for each of the axis: Roll, Yaw, and Pitch. So,
Read more…I was connecting the power for the Ardupilot on my aircraft when the power line slipped and hit the shield board and I heard a loud pop. :(Now I'm unable to communicate with the board at all. Whenever I try to download programs to the board I get the
Read more…Yet Another DIY Autopilot :)I've decided to go about making my own AutoPilot board from the ground up. Well, I won't exactly be starting from scratch - hopefully I will be able to incorporate the collective wisdom of this community :). I know there a
Read more…ok so ive searched the net with no luck well not no luck but not impressed by the prices that i see. so if any one can post me a site or three were i could find some good quality RC parts of all types would be helpfull
Read more…