Tattu low temperature battery version improved battery material design to support Max. 3C discharge at -30℃ low temperature. Discharge over 90% efficiecy at -10℃ and discharge over 80% effeciecy at -30℃. And the low temperature version has broked thr
Tattu plus 3.0 version is smart battery, and has unique design, sluminum housing heat-dissipation, sealed waterproof, smart external anti-spark device, portable smart checker, drawer slides design and LED indicator.
hi im new in this hobby and i hope anyone can help me
i’m trying to connect the HMC5883L GY-273 compass to the apm 2.8 but when i connect the compass doesnt work in MP, anyone know if this compass works with the apm 2.8 or is compatible?
I been seeing everywhere,whenever RPI and Pix are connected - it is suggested to do over Telem1/2 to RPI seriial Pins or use a FTDI connector to a RPI USB.
I'm trying to revive a half dead Phantom 2 by moving it's parts onto a F450 frame. While all is almost operational, one of the motor seems to spin less so I'm thinking changin all the motors to a better ones so the drone could lit more weight.
I have a Pixhawk FC, and am going to buy new ESCs. I was reading about calibrating and tuning ESCs and it seems that pass-through is not possible with Pixhawk([1], [2]).
(i) Are there any alternative/ solution for this? I am not going to be able to
looking for pix hawk programmer , drone expert in the Long Island New York area for short Gig ! you will be helping doing some custom programming involving pulling data from hall effect sensor and temp sensor from a BLDC large motor and educating s
The future of drones is not just for taking great aerial photos and gathering data. It’s also giving us the “flying Cars” or “Manned Drone” that humankind has been talking about for so many years. Imagine your daily commute with no more traffic jams,
I’m new to the world of FPV. I would really like to build a ‘long range’ cheap FPV quad but I’m really a newbie in this domain. I would like to order the down-listed components but I don’t know if it is right. Can you'all please tell me
Complete and utter noob here. I am looking for a suitable ESC for the EMAX RS2205 2300kv BLDC mounted on a Martian II 220mm frame. I already have a Pixhawk PX4 2.4.7 and plan on using that. I will be using the drone for indoor videos and/ or
I am working on a project where I need a quadcopter to accurately know its location relative to a starting point in a GPS denied environment in the dark.
A quick overview of the project: The drone will be mounted on a vehicle in a docking station
I am a part of the engineering team of a startup company called Zeius.
We are currently in development of a drone with gaming capabilities. As we’ve made progress on our internal developer tools we thought the drone community could benefit from these
The ARCHER GR8 FrSky receiver features the new ACCESS protocol. ACCESS provides the lower latency and increased performance of our previous G-RX8 receivers. With OTA (Over-The-Air) function support firmware upgrades will be very easy, no more wires.
I recently switched laptops and now have Windows 10. I installed Mission Planner on my laptop and plugged a mRo SiK Telemetry Radio into the USB port. The radio is not recognized on the com ports but is instead on the "Other Devices" tab in Device Ma
We are sincerely looking for the regional agents worldwide. The agents should qualified for the following requirement: 1. We have the simiar market and it would be great if you had some potential customers in our LiDARs' main application: Ben