Mission Planner has a blank flight data screen. Everything else works fine.
There was an update a few days ago.
Mission Planner 1.2.12 Mav 1.0.
Does anyone else have this problem?
Randy
Hello Friends,
I made a custom Quad (X configuration) with light weight aluminum towel rods and thin wood sheets as a center plate. I am using the tilt camera mount from Hobby-King as a base.
I am using the following components:
Read more…Hello everyone,
i want to use a pin of the APM board to attach my Servo because i want to do something when the drone is flying, I wonder if it is possible this. In that case, where should i attach it? In the channel's panel?
Thanks!
Read more…Hei,
can ArduCopter handle a tricopter with one or more tiltrotors, like this one?
-S
Read more…Hi guys,
I having problems connecting the Mission Planner Mav 1.0 to my APM boards ( I have 3 different types),
COM port is good and BAUD is set to 115200.
The connection flashes the board for a second then times out after 30 secs and the error reads:
Read more…I am adding an attopilot sensor connected to an APM1 board. The wiki seems to say I don't need to add a resistor to the board, but without one I am measuring 4.5 v on a battery with 12.5v. I am not sure if this is the cause. Any thoughts would be g
Read more…I'm a science computer student on the last year of the graduation. I started a hexacopter project and i want to understand how the arducpter code works, what is the best way to do that ? and how can i program for the arducopter project ?
i´m sorry abo
Read more…I'm selling my fully tested and flying 3DR Arducopter with 850 motors and standard ESC's. I will be removing my Rx & APM2 for my ArduPlane project. Just replace those with yours and you're flying. Never crashed, perfect shape and has GoPro mount o
Read more…Yesterday I did some testing of sonar.
I see that sonar altitude isn't smooth - it is understandable, as the ground isn't flat (I was flying over grass and small bushes). That implies nervous jumping of my hexa when flying on low altitude.
I think, tha
Read more…I'm still trying to get the basic concepts into my head. What I can't really wrap my head around is the endurance, or better, which factors influence the endurance how?
Of course, it's clear that weight is a factor and battery capacity. Then probably,
Read more…Good day,Tried my first test flight today without success.My goal for today was to hover in stabilized mode perhaps move around a little.HT-FPV frame10-47 propsAPM 2.5 with GPS and sonar2.7.3DX825 amp plush ESCDid the setup and calibration during the
Read more…Today I was flying my hexa without telemetry. Now I want to see some details from my flights, but I don't know how. I've successfully exported logs from APM and I have *.log, *.log.gpx and *.kmz files.
I can open kmz in Google Earth, but I don't know
Read more…Salve, sto assemblando il mio esacopter con APM2 e non riesco a memorizzare il minimo dei motori seguendo la procedura automatica consigliata. Ho provato anche la procedura di calibrazione diretta ( collegamento alla RX) , ma anche questa non memoriz
Read more…Just setup a new quad copter with the APM 2.5 and firmware 2.7.3. Have done the initial PID tuning and the copter flies stably and well in Stabilized mode. Flight characteristics are very good. Self leveling is working well.
Flight mode 1 is "stab
Read more…Good day,
I have completed the assembly and setup/calibaration of my first quadcopter,
Plan a test flight this weekend.
APM2.5
Failsafe action = 2.
DX8 - followed the post to calibrate the failsafe. Looks good.
On the bench, without props I noticed the mot
Read more…Just for curiosity, is possible to use EDF as the engines to quadricoptero?
like this one
Thanks
Read more…I am having troubles with a motor thats not spinning up. when I run the setup motors command in the cli I can't get one motor to spin up but if I manually do it, it spins up fine hits max and min just fine. Other motors start and stop just fine but I
Read more…Hi all!
I just registered to DIY drones after loitering for quite a while. I'm planning to build a quad or hexacopter and I'm just overwhelmed but the possibilities.
My main problem (I guess) is that I have no R/C background whatsoever. So the problems
Read more…I have fixed the problem with the motors by calibrating the ESC's but I have encountered another problem. When I go to take off the quad flips over the left side. I have tried calibrating sensors and adjusting the P and I gains but there is no differ
Read more…Hello people!
A group of friends and I set out on a project for school. We're extremely ambitious and face a tight deadline. I am really keen on accomplishing this and was hoping to find some support here.
Basically, we would like to merge the body of
Read more…