Hi there,
I encountered a problem, while flying in auto mode, with approching to point that was not set by trajectory and is not visible after downloading mission from flight controller by Mission Planner. Does anybody encountered similar problem. The
Read more…Hi,
Im working on a autonomous drones and im using JETSON NANO and flight controller PIXHAWK .Im able to control my drone by giving rc commands on the MAVLINK terminal itself by connecting it with PIXHAWK but now i want a python code from which i can
Hello guys,
I have a problem with one motor, do not spin and making a sound (videos in attachment), I changed the motor to another ESC and is work, so I checked the connections on ESC and all connections looking great. any ideas or something I can do,
Read more…I have been Reading Chris Olsen posts and watching his videos on Arducopter with traditional Helis using a Pixhawk.
I have inherited an older Trex 450 heli with the old Align 3G FBL hardware. The FBL controller appears to be bad. So I have an old AP
Read more…Hi all,
I'm setting up my PX4-based quad with ST VL53L0X Lidar sensors (I currently have three) and I noticed that line #24 of the current Rangefinder library (here: https://github.com/ArduPilot/ardupilot/blob/master/libraries/AP_RangeFinder/RangeFind
Read more…I have a raspberry pi reading mavlink messages from a pixhawk. When I read SCALED_PRESSURE I get hPa values around 490 - less than half of what I would expect - and a temperature around 4834 in cdegC - seems warm to me. This is consistent with what
Read more…Hi, everyone.
I'm using ArduCopter for the last 4 years and I always tried to find a way to disable the internal compass(es) to avoid the "error compass variance" and things like that when you have an external compass that can be used solely. So, the
Read more…I set up the ardupilot simulation in ubuntu 14.04 using this link (http://ardupilot.org/dev/docs/setting-up-sitl-on-linux.html)
Now my set up looks like in the above image.
I want to control the copter in this simulator using the actual remote of
Read more…I'm trying to find a way to do a controlled slow, smooth yaw (though if it can't be smooth, I can live with it) while in auto mode hovering at a waypoint. I've tried using "wait for heading" (mav_cmd_condition_yaw) but nothing seems to happen. Am I m
Read more…Hi, I'm new in this forum.
I have come here looking for a solution for my pixhawk, but I have not found it.
I have an F450 that was flying well. I upgraded to version 3.5.7 and started flying by moving a little to the left (it also suffered a blow, I d
Read more…Dear
i am a beginner i have set up each and every thing but when i armed my quad copter . motor no 1 satrt spining after 50% throttle whereas other 3 motors does not start spin but when i move my pitch than one of my motor start spinning too but my o
Read more…We use copter 3.5.5 for our hexa-rotors UAV.
The Vibration is in good level in stabilize mode. but changed worse in Loiter mode with forward flight.
The altitude control is getting worse.
Can anyone help?
the bin file is as follow:
https://drive.google.co
Hello, I recently had a problem with a pixhawk 2.4.8 board, and all channels work, except channel 3 of the throttle, I have already tried several things and even then it does not work, try to go back to a previous firmware version and I do not work e
Read more…Dear all
I need your help in the following simple(?) issue: I have connected through I2C two ARDUINOs (a master MEGA and a slave NANO). Using the following code they communicate correctly:
For the master:
#include <Wire.h>
String msg = String("");
void se
Read more…Hello everyone,
I want to manufacture a frame for a V-shaped hexacopter, to be used in industrial inspection functions with two cameras.
Can you tell me if it is possible to configure arducopter 3.5 for a hexa V frame?
I have read information from old p
Read more…Hi
I am building a 1300mm octocopter with 30AH lipo. I want to be using a tegra tx1 for onboard visual processing coming from a sony a6000.
I have built the drone and assembled it. I have configured it as usual. I was using the external compass on the
Read more…Okay here is what happened!
1. We power up all the devices.
2. Switch ON radio Tx
3. Arm the Safety Switch.
4. Slowly increase the Throttle
All fine now...
Suddenly, the Quad goes full power, blasting all the motors and Mission Planner connected via Teleme
Can one of the Dev's of Mission Planner please have a look at this error.
After the 1.3.50.1 release of Mission Planner, I can't Georeference my photos anymore.
I've followed the workflow a couple of times previous to the release and it worked without
Read more…Hi,
I am using a APM 2.6 FC for my S500 quadcopter. It is also fitted with telemetry to show flight parameters at gcs. I am frequently having a problem of auto initiation of RTL mode at a flight level of 150 to 200 ft, though the set mode is LOITER. I
Read more…Hello,
I have big problem with running that
I have connected receiver to APM, on MP i can calibrate and all works
But i don't have any reaction on output, servo don't work thro don't work :-(
I'm in Heli mode
Please help
Jarek
Read more…