I recently tried to take off from a boat "moving platform" after installing the latest 3dr update. After several attempts I gave up and took off from a dock. I ended making a pretty good video with some solo aerial shots https://www.youtube.com/watch
At some point the drone started behaving unexpectedly, not responding to my instructions the right way so I decided to do a factory reset to the device.
I followed the online manual from your web site and starte
Have anyone tried to access aux 1 (pin 50), (or other aux ports and ground pin) in 3DR Solo (Pixhawk 2). I need it to trigger a Sony camera with cam_trig_type: relay, which is quite trivial on pixhawk 1. 3DR support wouldn't help me out wit
Since this software update last week, we have had unexplained RTH events, followed within 2-3 secs by return to FLY mode. Three different Solos, with 3 different controllers. All running multipoint cable cam shots when error occurred.
Almost all of the professional landscape photos you see now-a-days are HDR, (a series of min 3 shots at different exposure values, processed to layer the light on top of each other to create a dramatic image). Processed from little (more accurate to
How are folks geocoding their photos taken from Solo w/ gimbal? I was hoping the lat/long would get injected into the EXIF header in real time through the gimbal's connection, but alas no.
On previous Pixhawk-based copters I've used the excellent RFD900 radio modem for telemetry and control. Now I'm flying a Solo so I'm wondering whether anyone has hooked an RFD900 up to a Solo-and-Tower combination. Or to Solo and another GCS?
Up until 3/17/16 I was able to connect to Solo with Mission Planner to download the dataflash logs. I have several other APM/Pix based copters and like to keep the logs in the same format, to compare and look for issues. Anyway, recently
Has anyone else been able to takeoff from a boat/moving platform with the solo? Whenever I try to takeoff from a floating non traveling boat, the solo wont even attempt to acquire satellites thus not letting me arm.
I'm trying to use an old iPad 2 running VLC as an external viewer of the Solo live video stream.
The access to this stream is described in the Solo Development Guide under the heading "Video Pipeline." Here is the URL: http://dev.3dr.com/concept-video
Hey fellas are there any specific parameters I need to change to enable the solo to initialize when it's NOT sitting on a perfectly still platform, as in on the deck of my boat. Using tower I've set the arming checks to "0" but that did not work, if
One item I was very interested in at the IDE was the ITELITE DBS Long Range Antenna (model DBS-03-ver.2) for the Solo. (See http://www.itelite.net/drone/ )
I procured one recently and tested just last weekend. Its certainly does what it say