Gender
Male
About
About Me:
Here to learn and start in UAV world
Please tell us a bit about your UAV interest
Arducopter !
Activity Feed
"Awesome !"
"I personnaly use the first version of the SJ4000 in a T2D gimbal, it fit well, it's a little be more stretch than with the Gopro . The bad thing is to remove the SD card or connect the USB you need to remove the cam . Personnaly I don't use anymore…"
"SJ4000 and other "clone" does the job for the money, be sure of that, there no added value that justifies the price difference
Compare yourself : Youtube SJ4000 vs Gopro"
Compare yourself : Youtube SJ4000 vs Gopro"
"Ok, after more investigation, my brand new landing gear controler is simply death...
Thanks you for your help, really ."
Thanks you for your help, really ."
"Hey thanks for your reply .
Can I test to retract without arming for testing purpose ? Cause I have all connected and configured my ch8 but nothing happened on the ground. I haven't flyed with this new frame yet"
Can I test to retract without arming for testing purpose ? Cause I have all connected and configured my ch8 but nothing happened on the ground. I haven't flyed with this new frame yet"
"Can anyone confirm to me than the new Landing gear retract function works ?
I have a new frame with retractable landing gear, have followed the wiki page about this function but can't get it to wrok.
I haven't flyed yet but I try this function on…"
I have a new frame with retractable landing gear, have followed the wiki page about this function but can't get it to wrok.
I haven't flyed yet but I try this function on…"
"Hi Leonard just for update,
here are the new result of my last autotune attemptStill a little bit windy today so the autotune process take long time .
Full log is here :
Gdrive log file
Please feel free to take a look"
here are the new result of my last autotune attemptStill a little bit windy today so the autotune process take long time .
Full log is here :
Gdrive log file
Please feel free to take a look"
"Unfortunately Leonard, my esc can't handle 6s power
Anyway, I've updated to 3.3RC5 and changed parameter as provided, I will give you a feedback when I can do a new fly, it's very windy at this moment here.
Just for the story, this frame is a piece…"
Anyway, I've updated to 3.3RC5 and changed parameter as provided, I will give you a feedback when I can do a new fly, it's very windy at this moment here.
Just for the story, this frame is a piece…"
"I'm running 4S 8000mAh
Here is the quad"
Here is the quad"
"Hello Leonard, and thanks for your quick analysis !
For the first problem I think is that should not use 10000mAh beacause is to heavy
Here are my setup :
2680g (2880g with 10000mAh)
Rctimer 5010 360Kv
Prop 16x5.5 carbon
Skywalker Quattro (4x 25A…"
For the first problem I think is that should not use 10000mAh beacause is to heavy
Here are my setup :
2680g (2880g with 10000mAh)
Rctimer 5010 360Kv
Prop 16x5.5 carbon
Skywalker Quattro (4x 25A…"
"Got 2 days ago a new problem in my new autotune attempt ( new battery from 8000mAh to 10000mAh)
Never experencied this type of problem, and because i can't clearly highlight what happend in the log files, hope anyone had a clue .
So in the…"
Never experencied this type of problem, and because i can't clearly highlight what happend in the log files, hope anyone had a clue .
So in the…"
Hello community,I trying to autotune my fresh builded slowfly quadcopter ( 360kV , 16*5.5" props ) without succesbeacause of my poor experience in log analysis and tuning, i'd like to understand what exactly doing wrong and how to improve it.I've…
Hi community ,Yesterday and today I did 2 test flight of my fresh builded SF quadcopter ( 15" carbon props and 360Kv motors)On the first flight, all is really good, loiter is rock solid, I just want to test all function , and all was pretty…
"Ok Johannes, today I did my maiden flight with my fresh build slow fly quadcopter ( 15' carbon props and 360Kv motor )
I've enabled EKF function with the parameter "AHRS_EKF_USE = 1" and tried to do an Autotune but got an
"AUTOTUNE ERROR: Bad Gains…"
I've enabled EKF function with the parameter "AHRS_EKF_USE = 1" and tried to do an Autotune but got an
"AUTOTUNE ERROR: Bad Gains…"
"Hi, I know I come 2 years later...
But for who come here from a google search or another way, here is the solution :
On the Turnigy 9x(r), go in your model settings, you will found at the bottom of the first setting page (1/11) the E.limits…"
But for who come here from a google search or another way, here is the solution :
On the Turnigy 9x(r), go in your model settings, you will found at the bottom of the first setting page (1/11) the E.limits…"
