Gender
Male
About
Location
Swindon
About Me:
love everything uav related....
Please tell us a bit about your UAV interest
www.rcgraphics.co.uk
Hometown:
hemel hempstead
Activity Feed
Hi,I would like to move my pixhawk between 2 different models, how do you backup all settings and configuration for one drone to allow the moving of the board to a different model, and later when its moved back how to restore all settings and…
"Thanks everyone for your replies, i will try them out tomorrow.
Tony"
Tony"
"Also is there a way to assign the flight mode to each switch position manually without using the flight mode setup in MP. Maybe through the params or something, if someone has the details of how to do this i would be very gratefull.
Regards,
Tony"
Regards,
Tony"
"Hi Brent,
Thanks for the suggestion. Im going back to 1.2.76 now. Ive reset and erased the APM and im going to re-setup everything. Just a note to say when i was looking and seeing the flight modes empty i was able to change the mode on the TX I…"
Thanks for the suggestion. Im going back to 1.2.76 now. Ive reset and erased the APM and im going to re-setup everything. Just a note to say when i was looking and seeing the flight modes empty i was able to change the mode on the TX I…"
"Update: ive just uninstalled 1.2.76 and installed a .msi of 1.2.74 which used to work fine and the flight modes are all empty still. I have powered the quad using 11.1v lipo, i have the 3DR wireless telemetry and the rc transmitter is powered and…"
Hi,I have been running v1.2.75 for a while now and today it asked me to update to 1.2.76 however after the update all the flight modes in the mandatory setup screen are empty, the drop downs are blank and i cant choose a flight mode.This has…
"tlog 2013-09-02 18-51-38.tlog - flipped at 18:57:26 (49.22% of time)
tlog 2013-09-01 17-59-54.tlog - flipped at 18:04:49 (92.36% of time)
Thanks"
tlog 2013-09-01 17-59-54.tlog - flipped at 18:04:49 (92.36% of time)
Thanks"
"This is the data log from today.2013-09-02 19-31 7.log"
Hi,I have a ardupilot 2.5 powered quad, with 3DR Power module, 3DR 433 telemetry and lea6 gps, BL-2217/19 motors, turnigy plush 25 sc's and 2200 3S lipo turning 10 x 4.3 props. All calibrated and first flight was lovely, test stabilize, position…
"Update, just in case i have updated the PPM firmware as recommended in the instructions, but still wont connect using 3.01 firmware. Can anyone out there help me to solve this problem."
"Update:
I have tried loading custom firmware from firmware.diydrones.com, STABLE, LATEST and one data 28th Aug, all had same results,
If i load 2.91b, after verifying the TX light on the board flashes every second
if i load 3.01, after verifying the…"
I have tried loading custom firmware from firmware.diydrones.com, STABLE, LATEST and one data 28th Aug, all had same results,
If i load 2.91b, after verifying the TX light on the board flashes every second
if i load 3.01, after verifying the…"
Hi,Hope someone can help with this problem thats driving me mad. I have been keenly following and building UAV's since v1 of the mega. Heres my current setup.In January i bought from 3drobotics:1 x APM 2.5+ Assembled (side entry) with 433Mhz…
"Hi John,
Just out of interest can you share your PID gains in stable.
Tony"
Just out of interest can you share your PID gains in stable.
Tony"
"Further updates.
Wiped everything and re downloaded NG from the repo. Install libraries in correct place and yipee X mode now works. How odd. Anyways all good for some flight testing tomorrow.
One thing ive found thats worth mentioning is i cant…"
Wiped everything and re downloaded NG from the repo. Install libraries in correct place and yipee X mode now works. How odd. Anyways all good for some flight testing tomorrow.
One thing ive found thats worth mentioning is i cant…"
"Hi,
Has anyone successfully for a red light on (GPS lock) with the latest NG code and a EM406 in NMEA mode at 38400 baud??
Using Sirf i can see i have a 3dfix and a good number of satelites.
The Red led on the EM406 is flashing but no GPS lock red…"
Has anyone successfully for a red light on (GPS lock) with the latest NG code and a EM406 in NMEA mode at 38400 baud??
Using Sirf i can see i have a 3dfix and a good number of satelites.
The Red led on the EM406 is flashing but no GPS lock red…"
"Hi,
Just an update, i cant seem to get NG to operate motors from radio signals correctly when in X mode, the code :-
if(flightOrientation) { // For X mode we make a mix in the input float aux_roll = (ch_roll-roll_mid) /…"
Just an update, i cant seem to get NG to operate motors from radio signals correctly when in X mode, the code :-
if(flightOrientation) { // For X mode we make a mix in the input float aux_roll = (ch_roll-roll_mid) /…"
