HiI am testing camera shutter functionality on Pixhawk. More specifically need to trigger shutter from the mission. I need to do different tests and I wonder if it is possible to execute mission without actually flying a machine? I dont want to remo…
HiFor some strange reason I do can arm my pixhawk while indoors without GPS Fix. This is in stabilize mode. I do remember that it was NOT possible previously to arm without GPS fix and I have not updated firmware for a long time.Anyones know why ?I…
"Thanks Ned , I will give it a try. I wonder what are the drawbacks of setting a filter on the camera lens instead of inserting it inside? Of course I willhave to first take out the IR filter. But the ability to so easily interchange filters for exam…"
"I wonder if anyone used red filter instead of blue. There are reasearch notes on Publiclab which tells that there is better contrast between healthy and poor plants when using red filter. Here are some of them
"I wonder about the behavior of the batteries I use on my hexacopter. It is 4S 5000mAh which I connected in parallel, that it 10000mA in total. When I fly it without a load (without gimbal+camera) I get more flight time which is of course self explan…"
Actually what I though was a problem was not really a problem with Sync or rather no problem at all. What happened was the following: when I draw up the throttle stick not all the motors started to spin at the…"
"I am sitting with the Hexa and Afro 20A ESC and expiriencing this same issue.
Is there any "consensus" about the problem and a common solution?
Is latest SimonK firmware working with Afro ESC with Pixhawk?
Will reflashing ESC with BLHeli fix the pr…"
"Here is an update after I have done my tests yesterday. I can confirm that passthrough works, at least for my needs, which is passing through radio signal to gimbal controller (Martinez with Alexmos in my case) to control camera pitch. I had connect…"
"Hugues, unfortunetely not all receivers support that. For example Futaba R6303S has 3 PWM outputs and one SBUS. You get 8 or 10 channels via SBUS while direct PWM outputs you have a choice of different channel groups on output1 and output2 for examp…"