Location
San Diego
About
About Me:
uav
Please tell us a bit about your UAV interest
photography
Hometown:
San Diego
Activity Feed
"Thanks, will do. Not quite sure which website is the active one or not. I still see a lot of activity here on DIYD."
I am using MP 1.3.38 and in the Auto WP / Survey / Grid Options there are various settings for:1. Overshoot[m] (this appears twice) and LeadIn[m] - I would appreciate an explanation of how these work when planning my missions.2. Copter Options -…
">>Grid V2 was a beta experiment
Thank you for that info, I did not know that. Hmm, V2 is pretty quick and easy but if it is not really going anywhere I will focus on V1."
Thank you for that info, I did not know that. Hmm, V2 is pretty quick and easy but if it is not really going anywhere I will focus on V1."
1. I like using the Grid V2 method a lot. But is there a way to view the Overlap and Sidelap, and adjust them, when using this method of flight planning?2. In 'Grid' , and 'Simple' tab, there is a checkbox for 'Camera top facing forward'. Is this…
Good afternoon,I am curious to know how RTH works in the APM Rover system? Specifically, if RTH is engaged does the rover try to drive directly back to 'Home'? Or does it return by reversing its original course up to that point in time?It seems…
"I just installed 1.3.33 and Norton antivirus is asking me if I want to give MP access to port 2300? Not sure about this, plus the "Not Responding' messages. I deleted and reinstalled 1.3.32 for the time being."
I found the file: cameras.xml in the MP folders, but is there any documentation anywhere describing how to actually add a camera? Or do you just cut/paste the XML and figure out the fov, image sizing, etc?Thanks
"The NX500 has a built in intervalometer, why not just set it to take photos every X seconds and be done with that? It can take photos starting at every 1 second.
Just curious why the trouble for a circuit like this?"
Just curious why the trouble for a circuit like this?"
"Thank you Michael, that clears it up. "
Good morning,I would like to know how to create my AutoWP / Gridv2 with the flight pattern going east to west? Or some other method of creating an east/west grid flight. I am using MP 1.3.30 Right now I am creating and flying Gridv2 waypoint…
"Thanks Gary. Am I doing this right?
I just added a new waypoint, which put it at the end of the WP list. Then I used the 'up' arrow to move it just below WP 3. Then I changed its function to LOITER_TURNS, and set it to 4 turns. And made sure it…"
I just added a new waypoint, which put it at the end of the WP list. Then I used the 'up' arrow to move it just below WP 3. Then I changed its function to LOITER_TURNS, and set it to 4 turns. And made sure it…"
I am running MP 1.3.25 build 1.1.5589.39444When trying to build a waypoint mission in Colorado (plane is not connected), I add a single waypoint.My goal after that first waypoint is to add a Loiter command and have it go 4 turns around that…
"Krischan,
Are you Army at Camp Navajo? If so you might have other options to get an aerial observation platform. So let me know your position/organization. It matters to the FAA regulations I point you at. If not Army, you will have to follow the…"
Are you Army at Camp Navajo? If so you might have other options to get an aerial observation platform. So let me know your position/organization. It matters to the FAA regulations I point you at. If not Army, you will have to follow the…"
"John,
Are you able to actually use all 12 channels of the Dragonlink Tx/Rx , with your Turnigy 9x? I am interested in this combination (with ER9X) but it seems a lot of radios are 10+ channels (a la Futaba 10C) but can really only use 8 channels…"
Are you able to actually use all 12 channels of the Dragonlink Tx/Rx , with your Turnigy 9x? I am interested in this combination (with ER9X) but it seems a lot of radios are 10+ channels (a la Futaba 10C) but can really only use 8 channels…"
"I have my ArduQuad flying, but I am really confused about powering the APM 1.4 / 2.0, and in need of clarification for powering my custom Hexa/Ardu build. The parts I have:
1. Diydrones Hexa PDB
2. Dimension 5V / 3 amp BEC
In the PDB instructions…"
1. Diydrones Hexa PDB
2. Dimension 5V / 3 amp BEC
In the PDB instructions…"
"I know this is an old thread but I wanted to ask if anyone has real experience using this UHF JR Module with the Turnigy 9X? I have a Turnigy, flashed it with er9x and installed the backlight and the 6 position Flight Mode switch. Works great. …"
