"Can you please explian how you setup the AWS machine to do the connection between the drone and the mission planner? Charles Linquist said:
I could give you a diagram, but it is really easy.
APM or PixHawk connects (via its telemetry port)  to a…"

"Hi
Got the package with the power cube, sensors and hubs all looks very very good.

Is there any printer friendly version for the manuals? Christian Mauch said:
Sorry, I've updated most manuals recently. The new link…"

"Hi

No problem, the FC will be powered form an auxiliary battery of 8s... how can I order those modified sensors?  Christian Mauch said:
Hi Guy... to modify the PL-xxx sensors max. voltage to 150V isn't a problem. However, the max voltage of my…"

"Hi Christian, 

I am already used to put your system on my builds and they works great and accurate ... so i got a little challenge, my next build is a pretty big one ... and will use a 28s lipo main pack ... i see that the x8 hub is already out and…"

"any updates regarding the hand crimp tool?

thanks"

"You can just use this:
http://www.mauch-electronic.com/apps/webstore/products/show/7594449

with 2 of these:
http://www.mauch-electronic.com/apps/webstore/products/show/7588549

and you are good all the way to 400A."

"I don't see any tape on the right aileron, only on the left, so I am guessing that the left already ripped out and was fixed with tape but the right was never taped... never trust the EPO as a hinge, I always cut it away and use tape as a hinge on…"

"can you be more specific? what do you see the is poorly setup? Andre K. said:
your elevator _TRIM setting does not match your TX config, airspeed is far from correct, , none of those causes it, but you need to check everything as even such basic…"