Gender
Male
About
Location
Moonee Ponds
About Me:
Aircraft
Please tell us a bit about your UAV interest
Looking at mapping, survey and cropping applications
Hometown:
Moonee Ponds
Activity Feed
"Andrew,
I use a 6mm main spar on a 600mm wingspan 600g plane that flies much slower than this and have had spar failures and flies with noticable flexing. I'm concerned that your 5mm spars will not be strong enough given the speeds that this flies…"
I use a 6mm main spar on a 600mm wingspan 600g plane that flies much slower than this and have had spar failures and flies with noticable flexing. I'm concerned that your 5mm spars will not be strong enough given the speeds that this flies…"
"Does anybody in Melbourne have any suggestions as to how we should be properly be disposing of our old LiPo batteries?"
"I had the same camera custom modified for $400 by
Camera Clinic
56 Easey St
Collingwood
Vic 3066
Australia"
Camera Clinic
56 Easey St
Collingwood
Vic 3066
Australia"
"I have the same plane and 2 of these cameras; one NIR and one RGB.
See attached.dim14-1.pdf"
See attached.dim14-1.pdf"
"Andrew,
Are you going to get another one?
Can I have a copy of your KML file please to compare.
Jerry"
Are you going to get another one?
Can I have a copy of your KML file please to compare.
Jerry"
"Andrew,
Are you really in Melbourne?
I'm in Moonee Ponds and am now on my second SkyFun and SkyWalker doing the same stuff.
Can we catch up?
Regs
Jerry"
Are you really in Melbourne?
I'm in Moonee Ponds and am now on my second SkyFun and SkyWalker doing the same stuff.
Can we catch up?
Regs
Jerry"
"I simply switch it all off after landing and start again.
Or am I misunderstanding your question?"
Or am I misunderstanding your question?"
"Where to start?
I had a look on my computer; I have Gb of files since starting this 5 months ago.
I had the camera's modified at a local camera repair shop. I ended up talking to one of the techos in the shop and he surprisingly knew exactly what I…"
I had a look on my computer; I have Gb of files since starting this 5 months ago.
I had the camera's modified at a local camera repair shop. I ended up talking to one of the techos in the shop and he surprisingly knew exactly what I…"
"you were going to say something........ "Where did you"?"
"See attached for what I hve done; one camer is RGB and one is NIR.SkyWalker03 email.JPG"
"The pic shows a mounting screw missing. The one shown does not look very tight. Other causes might be bent shafts. These motors are relatively cheap and easily replaced. Try another one and see if the vibration is reduced.
J"
J"
If anybody would like to view the attached KML file (2012-05-28%2017-29%205.kmz) and try and explain what happened that would be appreciated. For some reason my Skywalker (SkyWalker03%20email.JPG) decided to go its own way after nearly getting to…
I have Planner 1.1.86 and Arduplane 2.34.The first line in Flight Planner is...1 DO_REPEAT_SERVO 5 1900 60 2This automatically drives the servo 60 times at 2 sec cycles to trigger a camera.But, is there a way to turn it off,…
"Just found the attached in a local Australian paper.
'Only in America'.
I am just wondering what the implications are for the rest of us??drone AGE.jpg"
'Only in America'.
I am just wondering what the implications are for the rest of us??drone AGE.jpg"
"I just found the attached in a local Australian paper.
Only in America.
I wonder what the implications are for the rest of us??"
Only in America.
I wonder what the implications are for the rest of us??"
