Gender
Male
About
Location
Madrid
About Me:
Avionics Maintenance Technician
Please tell us a bit about your UAV interest
Avi-onics =)
Hometown:
Madrid
Activity Feed
Hello friends,First of all, I don't really know in which category could be assigned this post, if you do so, please tell me and I'll modify it.So, I'm planning to send a payload to nearspace with a Helium balloon. All powered with an APM sending…
"Sorry this is the topic: http://ardupilot.com/forum/viewtopic.php?f=80&t=6295"
"Sorry, here you have. I opened a topic in the forum, I think is better there...
http://ardupilot.com/forum/viewtopic.php?f=25&t=6292&sid=93... 18-04-07.log"
http://ardupilot.com/forum/viewtopic.php?f=25&t=6292&sid=93... 18-04-07.log"
Hello, This evening I crashed my hexa. :( First of all, I want to say that the main problem was the remaining battery...I wanted to reach 200m but I forgot that the Fence FailSafe was enabled at 100m, so I though I lost control of the copter when it…
"Hola Jose María, has calibrado la radio? Asegurate de no tener invertidos los mandos de guiñada. La primera vez que lo armas suele tardar en armar unos 6 segundos."
"Hello, I'm having the same problem. All the modules are new... 433Mhz Rctimer modules. I tried with another Ground module and it connects with no problems... I think that could be a problem in the firmware of the ground module but it doesn't let…"
"Hola, que yo conozca en los Bauhauss vebden al peso pero metrica mas pequeña que tienen es 4mm."
"Hola Baco, a mi me pasa algo parecido, mi problema es que me equivoqué a la hora de comprar mis módulos y compré los de 900mHz... (Ilegales en España) Cuando le doy a CONNECT empieza bien pero muchas veces a mitad de la carga, se ralentiza y llega a…"
"That is clearly a ''toiletbowling''. This is because you are having problems with magnetic interference. Have you done all the compass setups? Do you have an external compass? Check…"
"This is the LOG2013-12-05 18-41 15.log"
"I forgot to mention, it was the second flight I made with 3.1 RC5..."
Hello, yesterday I crashed my hexacopter :'( It was flying perfect all the morning but suddenly at 13:24 it was flying at 10-15 meters high and it rolled to the left and falled with no control. It is destroyed as you can see in the picture, lucky…
"One more question, do you know if there is an upgrade to this board to a better firmware?"
Hello, I've just installed my new gimbal (This one) and it works great! But I'm trying to add the Ch_6 function to control the tilt. It works great but only in +-30º if I pass those angles it starts to shake and goes crazy... It works great if I…
"If anyone is interested and can provide some information, I opened an issue in Mission's Planner List: https://github.com/diydrones/MissionPlanner/issues/246"
"Hello, This morning I was testing my upgrade to AC3.1-RC5 because I was having some problems with my sonar in loiter mode in 3.0.1. This morning evry problems were solved loiter was perfect. But alt-hold not so much... when I use yaw the copter…"
