"I know *exactly* what you mean. Let me tell you why you're here. You're here because you know something. What you know you can't explain, but you feel it. You've felt it during your flights, that there's something wrong with MinimOSD. You don't know…"
"Hi, I was the one to start this thread because i was so frustrated with my MinimOsd boards - such a great small device and still always failed. i can now say that two years down the road (Hard to believe more then two years passed since) and my…"
"Wow, this is exciting! Looks amazing, and I will shortly test it and share my findings.
One question though: does one's flight logs shared over the internet once loaded to DronAlize WebApp?"
"Why is it not possible to playback in Mission Planner Dataflsh log files?
Did any of you out there created a converter from LOG to TLOG? I don't have telemetry that covers more then few hundreds meters, hence the need for LOG's playback.
Hello people, I need your help please.Normally I'm running Tower App on my LG G2 where 3DR Telemetry is connected to it using OTG cable.This works great. Lately i have moved to a 500mW telemetry modules and this one drains my phone battery very…
"Thank you Andre.
Following your advice i have disabled Vtail mixing in my radio, and enabled in AP.
All seems to be working fine now, still some more tests are called for.I was flying with APM2+ for many years and can't recall such issues up until i…"
Hello.I have set up an Anaconda platform with PX4 running latest arduplane 3.4.0 and everything looks to be working just fine except one annoying thing:When in Stabilize, all surfaces works and response correctly except one Vtail surface which…
"Ok, Apparently Pix is much different then APM MEGA.
I had to add a 4th wire which is X2 TX > GPS RX for X2 to receive GPS data.
All seems to be working now."
"I have the exact same problem and after hours of fiddling with it i've decided to search the web just to find this post of yours from one month ago. I am lost.
Hi all,I was searching to see if anyone else got this same error to no avail.I was updating my APM2 Plane which was idle for few months with latest AP 3.3 (and 3.2.3) and no matter what I keep getting the same attached error message. Firmware is…
"Hello Nick and thank you for your prompt reply.From my experience with APM's they can reboot if voltage drops momentary. that's why i always add a big capacitor to survive these dropouts. Should i be alarmed to know that without TPS63061 these…"
"I fly with either Dragon link UHF or Taranis 2.4Ghz. I must know these great looking AUAV-X2 will not RFI on these frequencies. To top that, i need to know it is immune to my on board TX's, e.g: either 1200 / 2400 / 5800Mhz. Once i will be assured…"
"Hello there good people,
I have hkpilot 2.7 and so far looking good except the fact that unlike my 3Dr Apm mega, when connecting HKP27 by USB cable to my computer(s) I get kinda gibberish in Mission planner (1.3.15). speed is set for 115,200.…"
"you are reporting the exact same problem I have/had.
It started when OSD suddenly diapered without notice, and lately I am having the same problem where OSD blinks but keeps working. After months of tests I found out that the problem is somehow…"