"BTW Ken, how much flight time and experience do you have so far? It seems to me that most folks that get the RTF models have little to no experience. Unbox and ready to fly autonomous missions. I have always suggested getting a Radio shack or…"
"I agree totally with Oliver, it's exactly as I would and have done before. Also, what is your battery discharge rated at? 20C? There is also a setting in the mission planner for throttle mid, check that setting as well."
Hello all, Thought I would share my concept of LED lighting for my recently built Quad. I decided to wire up an LED strip with an Arduino mega. With the Mega board I am able to control the flashing sequence and the RGB LED's allow any color as well.…
"Have to ask, but have you been outside for the link test. Only asking cause the video looks like it was shot indoors. I have had the same problem and it was when I was inside and hooked to APM."
"have to ask cause it looks like the video is made inside. Are you outside or at least in view through a sky light, large window, etc. to recieve the GPS signal?"
"Having just built my first quad with a Pixhawk, I would say the Pixhawk is more reliable to date. I have had no problems so far and tuning a reliability along with future updates is worth it."
"Before building a high dollar quad I went to Radio shack and got a "Heli-quad" 6 axis toy and crashed the heck out of it just learning to fly. When you couple the high cost and flight modes these machines can do today, the 60 bucks on the toy has…"
Agree with all. Having just built my first quad with virtually no RC experience, this type of approach is the best way to go about it. Also, read, read, read all the post, blogs, forums, articles, watch the videos, etc. Everything about…"