"I have seen this behaviour when using do_digicam commands while flying survey grid missions. The do_digicam command is a waypoint that follows reaching the calculated camera triggering waypoint....
"Yes Chris I do it all the time! http://monarchmakers.com/index.html
Slightly more efficient, we have noticed a 5-10 percent increase in flight times using this method and as you said the c clip popping off doesn't down the bird!
Loaded Mission Planner "beta" and did a compass calibration, it collected 2050 points on a 15 lb Quad and continued boy am I pooped! the sphere was well populated but it still showed the dreaded needs more points message. I just can't…"
"+1 here too!
I've resorted to manually adjusting the focal length of the camera to fool it into giving me the correct Field of View for the Altitude I fly based on the FoV calculator that Tetracam supplies with their PixelWrench software. We had…"
"I have had a better upperbody work out today than I've had in a few years twirling and dancing with a 15 lb quad! 3000+ points and an almost solid sphere, really!
Is anyone working on this or should we all go back to 1.30?"
"Yes Michael, I actually am a Tetracam dealer (CalUAS) an have a good working relationship with the guys there.
I went there and asked them that, I actually thought I'd found an error in there spec sheet, like maybe the focal length was really 28.43…"
"I am having the same problem even with MP 1.2.99.
I fly the Tetracam ADC Micro for crop NiR NDVI analysis. I used the preconfigured Tetracam ADC Micro that showed up in the camera list, checked all of the specs against the Tetracam website's spec…"
I updated my MP yesterday and was surprised to see I have a problem with the new version.When I create a flight plan using Auto WP and the Survey(Grid) mode.The first time I use it after the update everything works just like it has in the past, I…