About

Gender

Male


Location

paris


Please tell us a bit about your UAV interest

je suis un grand passionné


Hometown:

paris


Activity Feed

Touotune06 replied to Euan Ramsay's discussion What's the difference between y6a and y6b in frame type?
"Version 3.1.2 and Y6A or y6B ???"
Feb 11, 2015
Touotune06 replied to Touotune06's discussion My pixhawk unbootable !! help me
"After some research I found several conversation he had flashed the Bootloader PX4IO "px4io-v2_default.bin" on pixhawk with the software "Qgoundcontrol" qand but I try flashing the "px4io-v2_default.bin" I have a bootloader error message (see below)…"
Apr 25, 2014
Touotune06 replied to Touotune06's discussion My pixhawk unbootable !! help me
"I checked the SD card. inside it there was a "APM" folder and inside that folder there is a "boot.log" file. when I open it with the text editor there cried "No PIO board found""
Apr 25, 2014
Touotune06 posted a discussion
I opened my quadcopter frame for added power switch on my gimbal to be able to turn off when I do not use it. once finished I close the frame, I plug the lipo to test whether my switch worked well but My pixhawk suddenly stop working! it is a…
Apr 25, 2014
Touotune06 replied to Sean Spencer's discussion PIxhawk Random Flip
"Hellos. What are the results of your test with your pixhawk small quadcopter? thank you"
Apr 17, 2014
Touotune06 replied to xoltri's discussion Pixhawk causing motor sync issues.
"Sorry to hear that you had the problem too. octocopter your fly so well ... I was envious to have the same result, and voila you encountered the same problem. I can apris a better used Mission planner and I looked to RCout outputs and for me the…"
Apr 16, 2014
Touotune06 replied to xoltri's discussion Pixhawk causing motor sync issues.
Apr 16, 2014
Touotune06 replied to xoltri's discussion Pixhawk causing motor sync issues.
"I did my configuration using a eCalc table! performance and optimal configuration for use. I can not use 17 "with 4s. kv and ideal for the 4s and 15x5.5."
Apr 15, 2014
Touotune06 replied to xoltri's discussion Pixhawk causing motor sync issues.
"Yes I have AFRO 30a I just flashed with the latest firmware to date. I do test this week.
I not understand is that many people (may have seen on youtube) uses low KV motor with esc SimonK and pixhawk no problem. I myself have a Hexacopter (naza v2)…"
Apr 15, 2014
Touotune06 replied to xoltri's discussion Pixhawk causing motor sync issues.
"xoltri right.
The Afro HobbyKing esc (especially 30amp) are very popular in the world of multirotor and very used because it is of very good quality for a reasonable price. it also supports I2C controller for user Mikorokopter flight. it was esc…"
Apr 10, 2014
Touotune06 replied to xoltri's discussion Pixhawk causing motor sync issues.
"xoltri n'est pas le seul à avoir ce problème parce que j'ai le même problème. J'ai aussi ce problème et il ya beaucoup de témoignages sur rcgroupe similair et autre forum de rc.

I thought I read on another post that apm was against a 100hz 490Hz…"
Apr 8, 2014
Touotune06 replied to xoltri's discussion Pixhawk causing motor sync issues.
"there is a person who posted a video on youtube and it uses a pixhawk with afro esc on a octocopter and has no problem ... I posted a video commantaire on ca and my replied that flashed the latest firmware for the Afro esc with usb linker HobbyKing.…"
Apr 8, 2014
Touotune06 replied to Touotune06's discussion My first flight in pixhawk it ended badly.
"Can you at least reported model of speed controller compatible with pixhawk?? I do not want to have purchased 4 esc without being certain that it will work. I do not know how to solve this problem and clearly view the number of testimony that found…"
Apr 6, 2014
Touotune06 replied to Touotune06's discussion My first flight in pixhawk it ended badly.
"I stated that since the beginning of the esc are connected to the signal wire and the ground wire"
Apr 3, 2014
Touotune06 replied to Touotune06's discussion My first flight in pixhawk it ended badly.
"for the moment I can not test with a propeller on the motor. but as soon as I can I will try. but without propellers at startup the engine makes a strange sound before taking ca normal rotation. and the eye are way well the engine has trouble…"
Apr 2, 2014
Touotune06 replied to xoltri's discussion Pixhawk causing motor sync issues.
"Bonjour. Après mon premier vol avec pixhawk (et mon premier crash trop) je me rends compte que j'ai le même problème que vous. une accélération soudaine mon quadcopter a un moteur qui est désynchronisation et l'accident était inévitable. J'aurais dû…"
Apr 2, 2014
More…