This is the new Tumba-Quad-Q240 "Wanze". The max. dimension is less than 10 inch.The copter was designed for the International Micro Air Vehicle Conference IMAV 2012 last week. Ranking: 3rd, 2nd, 1st, 1st together with the hexacopter…
"I was with my team (Academic Flight Club Bremen / Germany) at the IMAV 2011. DLR (Germany) was winner of one outdoor competition, but there were 5 competitions. And at the end we had 3 times the first price. :-)…"
"@ Krzysztof Ok, 479 mm ... then your FOX is smaller. :-) ... I will not cut my balsa - wings... :-)
@ DaveyWBB ups... I never creates config files for a quadrotor... There the paparazzi team can help or a friend of mine at the Bremen University, he…"
Here is my new quadcopter. The max dimension is 185 mm (tip to tip). The video from the first outdoor flight is shown here: http://www.youtube.com/watch?v=Un_guPJ1QocSome details:- weight 170 gramm- propeller AirAce 3-blade left/right, motor Hacker…
"I was on the IMAV 2010. It was only 150 km from my home. I have also seen this vehicle during the flight. All markers are different, the vehicle knows exactly the location. It was impressive."
"Now I performed the first flights, every thing works. I was flying automatically 4 turns, each 1 km. The dropping point will calculated by the flight altitude and the wind. The wind will updated permanently. Now I optimize all closed loop…"
Hi all, I would like to present my new UAV project based on the ATMEGA 1280 and Arduino language. On the autopilot there is the ATMEGA 1280, a 5V and 3.3V regulator, 4 low pass filters for the IMU, 4 connectors to motor/servos and connectors to the…