Gender
Male
About
Location
PARIS
About Me:
I'm a telecom engineer working for alcatel
Please tell us a bit about your UAV interest
I'm now believe that i can FLY :)
Hometown:
paris
Activity Feed
"And how the YAW is working on this ?"
"So for the flight control i use multiwii 2.3 with the singlecopter setup.
I had a bluetooth dongle to control (servo inversion) and gain on my phone (with EZ GUI) app
I use 2 BEC in parallel (2X2 amp) because of the consumption of servo.
I have a…"
I had a bluetooth dongle to control (servo inversion) and gain on my phone (with EZ GUI) app
I use 2 BEC in parallel (2X2 amp) because of the consumption of servo.
I have a…"
"In my case 3S batterie was not enough ! I put a 4S and it was better."
"I think i can give you some advises after my tests of singlecopter
https://www.facebook.com/patrice.rance/videos/10206758020857588/?l=..."
https://www.facebook.com/patrice.rance/videos/10206758020857588/?l=..."
Here is my tryThanks to Kert (Clément Tavernier) for the 3D print filehttps://www.facebook.com/video.php?v=10206363919005288&l=7537941487476266701Enjoy
"Guys please it's a FAKE !!!!!!!!!!!!!"
Here is the FlyManta AVATAR movie shoot made this week-end with a 2 axes Direct Drive Brushless. I was at Cité Universitaire in PARIS where i live. (A kind of Big Campus for foreign people. All nationality is represented here)FlyManta particularity…
"thanks ellison for your response about Bi Copter configuration."
"Marco,
To fully test the ACCRO mode you should try LOOPING and BAREL. :)"
To fully test the ACCRO mode you should try LOOPING and BAREL. :)"
(Moderators- User informed to add content to post, I.E video/pics)Hi everyone,From month now, i finaly decide to make that build that i wanna share here.The control is AIO Pro card with Multiwii 2.1 don't know if APM can handle the Bi Copter…
Have you ever see a Verticopter ;)COG is in between the morors, top and bottom pivot to control Pitch Yaw:Roll controlled by motor speed.He made it from PLA plastic Part and 12 mm Carbon tube.AUW 880 Grams on 3S2200 lipo 8 by 4.5 Props on GAUI…
"Thanks Dany !!! i really like this frame. now it's time to change the ESC for 12 amp ;)
but the harder job is to have a pan/tilt camera onboard who can film stable movie. (not so easy) !!!
i'm using 2 mm square aluminium stronger than 1 mm. need…"
but the harder job is to have a pan/tilt camera onboard who can film stable movie. (not so easy) !!!
i'm using 2 mm square aluminium stronger than 1 mm. need…"
Hi all, here is what you can expect from that plateforme with 10 amp ESC and KDA 20/26
Hi Guys, (and girls ;))I've tried today the Moving Average Function for smoothing the Gimbal servo.Here is my result with 300 Hz refresh rate and a windy condition. I'm happy because this average really help.I still have vibration but less than…
