Artūrs
  • Male
  • Latvia
Share

Artūrs's Friends

  • Stefan
  • Stevod
  • ParkYoungju
  • Winston N
  • Thomas Stone
  • Janis Kuze
  • Diego Stefanello

Artūrs's Groups

 

Artūrs's Page

Latest Activity

Artūrs replied to Mike Sousa's discussion syncing drone clock to ugcs pc clock for geotagging in the group UgCS
"Hi Mike, Best way to sync clocks is to simply make a photo of the exact clock in UgCS ( put the mouse pointer on the clock to open precise clock) And with the millisecond clock wisible, make a photo with your Mavic 2 or Matrice 210 before…"
Mar 14
Artūrs replied to Keith Conley's discussion Not progressing to waypoints in the group UgCS
"Hi Keith, We think that the problem could be caused by the Camera action - Tilt. Could you please try to remove this action and fly the route in simulator first and then, maybe try it in flight? Maybe you have a closer location where you could just…"
Jan 25
Artūrs replied to Keith Conley's discussion Not progressing to waypoints in the group UgCS
"Hi Keith, I am sorry for your inconvienence. Are the attached routes the exact ones which have problems? I assume you are using Phantom 3 Advanced? While our engineers are investigating the Misson, could you repeat the the routes in simulator mode…"
Jan 21
Artūrs replied to Steve Cudmore's discussion UGCS Battery % showing 0% but Voltage Normal A3 in the group UgCS
"Hi Steve, Thanks for reaching out on our forum. Unfortunately, since in DJI SKD there is no option to get battery percentage in case non-DJI batteries are  used, we can not display a percentage. This would be a very complicated feature, since…"
Jul 26, 2018
Artūrs replied to Corey's discussion Circle Waypoint Type/Loiter in the group UgCS
"Hello Corey, I am glad you like our software so far. Regarding circle tool, TBH I am not personally familiar with loiter tool in Mission Planner, only Loiter flight mode. I did not clearly understand what is the functionality you would like to…"
May 2, 2018
Artūrs replied to Robert Matthews's discussion Export telemetry crashing in the group UgCS
"Miguel, We have concluded that the A3 flight controller (used in M600) sends very large amounts of telemetry data every second (slightly more than other our supported flight controllers) and therefore the telemetry data is slowing down UgCS and…"
Apr 26, 2018
Artūrs replied to Christian Freydl's discussion shutter control for DJI M600 (A3) in the group UgCS
"Hi Chirs, Thanks for pointing out at the article, we had not mentioned that the article applies only to -non DJI cameras If you have a DJI camera like Zenmuse X5, X7, Z3, etc. this does not apply and you can use trigger by time function. But if…"
Apr 23, 2018
Artūrs replied to Stevod's discussion How do I enable Telemetry for Emulator in the group UgCS
"Hi Victor, Unfortunately we have not a tool for that because we honestly do not work with DJI software at the moment. The only way I see for now would be if there was an enthusiast around who would create such tool. Regards, Artūrs"
Apr 9, 2018
Artūrs replied to Robert Matthews's discussion Flight planning problem in the group UgCS
"Robert, After talking to our developers, it seems this is a known problem. We have raised the priority for fixing the issue, so I hope this will be solved in one of the upcoming versions. For now, the only workaround is to split the Photogrammetry…"
Apr 4, 2018
Artūrs replied to Robert Matthews's discussion Flight planning problem in the group UgCS
"Hi Robert, Thanks for notifying, it seems that the uneccessary area is being covered because of the complex shape. To investigate the case further, please e-mail us your mission or route file together with the screenshot to support@ugcs.com We…"
Apr 3, 2018
Artūrs replied to Ligia Frangello's discussion Mavlink messages through TCP in the group UgCS
"Hi Ligia, UgCS is trying to download route from vehicle on connect. See MISSION_REQUEST_LIST and MISSION_COUNT mavlink messages. You can respond with 0 count on that. Hope that helps, Artūrs"
Feb 28, 2018
Artūrs replied to Ethan Payne's discussion Display images onto UGCS in the group UgCS
"Dear Ethan, As of now, it is not possible to create single GeoTIFF images without stitching them. Reason for that is, that creating single images makes no sense, as the images need to be stiched to match elevation. Without stitching we can not know…"
Feb 2, 2018
Artūrs replied to Ethan Payne's discussion Display images onto UGCS in the group UgCS
"I can not promise you anything, only a rought estimate would be at least 3 months from now. Regarding your second question about Mapper, could you please elaborate what is the exact function you would like to have? Is it simple image geotaggin…"
Jan 31, 2018
Artūrs replied to Ethan Payne's discussion Display images onto UGCS in the group UgCS
"Hello Ethan, Thanks for your suggestion, our developers have thought about this possibiliy too, so I will be adding this as a feature request and hopefully for UgCS 2.15 it will be available. Best regards, Artūrs"
Jan 31, 2018
Artūrs replied to plop85's discussion HELP: No UCS connections in the group UgCS
"Hi! I did not fully understood if you are having problems installing the UgCS for DJI 2.9.99 APP on your CrystalSky or the APP does not connect to Desktop installation. If you are able to install the app but it does not connect to Desktop…"
Jan 22, 2018
Artūrs replied to Robert Matthews's discussion Export telemetry crashing in the group UgCS
"Hello Robert, I am sorry for the inconvienence. Are you completely sure that with previous (UgCS 2.12) it was better (both telemetry export and flight line drawing)? Would it be possible for you to send us some example telemetry export for…"
Jan 19, 2018

Profile Information

About Me:
I work as test engineer at SPH Engineering in Riga, Latvia.
Please tell us a bit about your UAV interest
Since I started working with UAVs I developed genuine interest to find out new ways to make them useful and improve them.
Hometown:
Riga

Artūrs's Blog

Controlling the speed of automated missions in real time with UgCS

Posted on April 16, 2015 at 1:00am 6 Comments

Greetings, 

Some interesting news from UgCS Team.

We have modified the firmware based on ArduCopter v3.2 firmware for it to allow us to control the…

Continue

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service