Luc Maximilien
  • Male
  • Italy
Share

Luc Maximilien's Friends

  • Arvista
  • Ellen Zhu
  • Norimbo
  • Pascal Fust
  • Randy

Luc Maximilien's Groups

Luc Maximilien's Discussions

After 19 minutes in Loiter ,150° Yaw rotation and went gently down vvithout responding to radio sticks

Started this discussion. Last reply by Luc Maximilien Aug 30, 2016. 9 Replies

Pixhawk last revision with 3.3.3 firmware.It is not the first time it happens, but previously I suspect bad compass , Gps gliches, solar storms .Today I check everything twice and all was going…Continue

Heavy drone crash during Ski World Cup

Started this discussion. Last reply by Andre K. Dec 23, 2015. 1 Reply

Italy already…Continue

Tags: campiglio, madonna, slalom

Circle mode not working as it should

Started this discussion. Last reply by BaNe Machine Sep 23, 2014. 2 Replies

I'm using version 3.13  with an Hexa ,Even if I change the value of circle_radius  from 20 to 30 the copter circle perfectly but only with a radius around 10 meters .Also the circle_rate  with values…Continue

Tags: rate, radius, circle

Only two output pins with PWM for the gimball ?

Started this discussion. Last reply by Luc Maximilien May 7, 2014. 1 Reply

I have recently bought a APM 2.6 , I use a custom build brushless gimball for Sony cx730 and only pins A10 and A11 have a PWM output while I need another one for the zoom function of the Sony.I have…Continue

 

Luc Maximilien's Page

Latest Activity

Luc Maximilien replied to Marthinus's discussion Advise and help needed. Quadplane accident.
"Nice job for motors mounting, well done ! During QLoiter hover, your motors required 33,4 A , 728 Watts , when taking altitude in QLoiter 39 A , 833 Watts.The plane motor with that propeller should use just 6,2 A to fly at 67 km/h - 18,1 m/s So…"
Apr 29
Luc Maximilien replied to Marthinus's discussion Advise and help needed. Quadplane accident.
"Glad you did it ! What is your AUW ?  4300 grams ? I'm curious about how you attach the carbon tube with  motors , can you show a photo ?"
Apr 27
Luc Maximilien replied to Marthinus's discussion Advise and help needed. Quadplane accident.
"I use the 2.0.25  version of Apm Planner 2 on Linux Mint  and Windows 7 64 . The the 32 bit version for Windows is not the latest and have some bugs."
Apr 26
Luc Maximilien replied to Marthinus's discussion Advise and help needed. Quadplane accident.
"The graph was made with  Apm Planner 2"
Apr 26
Luc Maximilien replied to Marthinus's discussion Advise and help needed. Quadplane accident.
Apr 25
Luc Maximilien replied to Marthinus's discussion Advise and help needed. Quadplane accident.
"When you have switched to FBWA your battery was quite low just 3,4 volts per cell, than it drops to 17,4 Volts with 59A , so 2,9 volts per cell , a condition where Lipo batteries get damaged. Then your Ampères went gradually, 4 seconds…"
Apr 25
Luc Maximilien commented on David Anders's group X-UAV Talon
"How good is your Talon when dealing with altitude ? I'm running some tests with my Talon to understand how well the target altitude at waypoints is reached and maintained as well as during Loiter mode. This is how my Talon do in Loiter with…"
Mar 25
Luc Maximilien replied to iSkyMaster's discussion LiDAR for Pixhawk "or" for dummies? in the group PIXHAWK
"I recently bought 3 Lidar and mount one on a plane with Arduplane software. From my tests the Lidar on Arduplane 3.8.4 is only used in Land mode since in Auto mode the EK2_RNG_USE_SPD will prevent from my understanding the use of the Lidar since…"
Feb 19
Luc Maximilien replied to Arvista's discussion For Sale: X-UAV Talon MAX airframe
"I wrote you a PM but got no answer. Can you make an invoice ? How big is the airplane box ? Thanks"
Feb 1
Luc Maximilien replied to Jamie M's discussion Pixhawk Mini Telemetry with FLIR
"Buy a Mrobotics  X2.1 autopilot , it has 3 telemetry ports and IMO is much reliable than the Pixhawk Mini."
Jan 30
Luc Maximilien replied to Kevin's discussion What do you think of this LiDAR for drone?
"The  Lw20 has a waterproof enclosure so it is not possible toe solder wire to serial output , you have to send back the unit to a lightware assistance center.I just did a short test  with the  TF-mini , I do not like the fact that…"
Jan 4
Luc Maximilien replied to Kevin's discussion What do you think of this LiDAR for drone?
"I recently bought three Lidars.Lightware LW20/I2C , LeddarOne and Benewake TFmini, the last two with serial connection . The Lw20 has an interesting feature to drive directly a servo to scan and could be use for obstacle avoidance but beware , do…"
Jan 3
Luc Maximilien replied to Jason Marsh's discussion Flight Controller for 2.5m Octocopter
"Beware that the more big are the propellers the more difficult is to control their inertia. Start with a smaller and most important with a lightest copter do some filming and then reconsider your project. t You will probably find that flight time is…"
Dec 14, 2017
Luc Maximilien replied to yangdaonline's discussion Drone gimbal for SONY DSLR A6000,with zoom,record and trigger
"Hello yangdaonline , Weight of the gimbal ?"
Dec 8, 2017
Luc Maximilien replied to Ben Dellar's discussion Alternative noses for the Talon (3D Printed) in the group X-UAV Talon
"Here is my version of the Talon nose. https://www.thingiverse.com/thing:2652085"
Nov 17, 2017
Luc Maximilien commented on Phillip Kocmoud's blog post Introducing the AUAV X2.1 Flight Controller
"I have receive yesterday  the board and was able to install Arduplane 3.8.2 with Mission Planner. Parameter AHRS_ORIENTATION must set to 2 if you mount your board with front in front of the plane. Do someone knows where I can find  a 3D…"
Oct 6, 2017

Profile Information

About Me:
bulid multirotors for aerial videos
Please tell us a bit about your UAV interest
parnerships

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service