Janis Jonins
  • Male
  • Riga
  • Latvia
Share

Janis Jonins's Groups

 

Janis Jonins's Page

Latest Activity

Janis Jonins replied to Mike Sousa's discussion mavic pro zoom record video around route stop and turn and control zoom level in the group UgCS
"Hi Mike, 38mm is focal length, this value has to be set in UgCS Mission editor, camera action "Zoom" field. Best regards,UgCS Support TeamJanis Jonins"
Sep 3
Janis Jonins replied to ActionDrone's discussion Orbit scan around a vertical structure in the group UgCS
"Hi, You can create multiple circles, specify altitude higher for each next circle. Once one circle is finished, drone will move to next circle.  Best regards,UgCS Support TeamJanis Jonins"
Sep 3
Janis Jonins replied to Mike Sousa's discussion mavic pro zoom record video around route stop and turn and control zoom level in the group UgCS
"Hi Mike, If you are flying simple waypoint mission, camera action is valid till next waypoint with camera action. If you are performing Area scan or Photogrammetry mission, "Action execution" for route has to be set to "Forward…"
Sep 3
Janis Jonins replied to ActionDrone's discussion Orbit scan around a vertical structure in the group UgCS
"Hi, There is tool Facade scan in UgCS. Tool is designed to perform vertical scan with specified overlap. You specify A and B points, lowest and highest points for scan, overlap and distance to object, route is calculated automatically.  You can…"
Sep 3
Janis Jonins replied to Mike Sousa's discussion DJI Zenmuse Z30 Zoom in the group UgCS
"Dear Mike, In UgCS zoom action for DJI cameras is not implemented. Zoom can be controlled only manually from RC. Best regards, UgCS Support Team Janis Jonins"
Aug 28
Janis Jonins replied to Angela Livingston's discussion DJI GO and Andriod in the group UgCS
"Dear Angela, If camera preview is not shown in DJI Go4 application, this might be issue related to drone hardware. Can you try different Android device? Best regards,UgCS Support TeamJanis Jonins"
Jul 15
Janis Jonins replied to Angela Livingston's discussion DJI GO and Andriod in the group UgCS
"Dear Angela, Could you please give more details - what drone are you using? Do you have have enabled camera preview in UgCS for DJI settings? Best regards,UgCS Support TeamJanis Jonins"
Jul 11
Janis Jonins replied to Angela Livingston's discussion DJI GO and Andriod in the group UgCS
"Dear Angela, Galaxy Tab A6 is rather old device and is not included in list of compatible devices for DJI Go https://www.dji.com/lv/downloads/djiapp/dji-go-3 UgCS for DJI is built based on DJI Mobile SDK, if your android device is not able to run…"
Jul 11
Janis Jonins replied to Mike Sousa's discussion Set waypoint as landing spot in the group UgCS
"Hi Mike, Option "Change start point" allows you to start mission from selected waypoint. This functionality is implemented to allow resume incomplete flights in any cases when it was necessary to call drone back home in middle of mission…"
Jun 3
Janis Jonins replied to Mike Sousa's discussion Adding waypoints to existing route? in the group UgCS
"Hi Mike, You can insert new route segment or waypoint by selecting waypoint, this will insert new waypoint or selected tool after waypoint you have selected, using tool "Modifier: Insert new route segment before current one" you can insert…"
Jun 3
Janis Jonins replied to Mike Sousa's discussion telemetry window, change lat/long to decimal? in the group UgCS
"Hi Mike, Currently coordinates are displayed only in d,m,s format.  It is planned to add decimal format for coordinates in some future release. Best regards, UgCS Support Team Janis Jonins www.ugcs.com/support"
May 31
Janis Jonins replied to Mike Sousa's discussion route param changes in flight in the group UgCS
"Hi Mike, No, it is not possible. Route is uploaded to autopilot and can not be edited in realtime. If changes to planned route are necessary, route should be edited in UgCS Mission planner, edited route should be uploaded to drone. Best regards,…"
May 31
Janis Jonins replied to Mike Sousa's discussion overlaps vs set camera by time in the group UgCS
"Hi Mike, Forward/Side overlap is kept if you use automatic trigger by time or distance. If you specify custom trigger distance, forward overlap will change according to specified settings. Best regards, UgCS Support Team Janis…"
May 31
Janis Jonins replied to Mike Sousa's discussion taking photos between waypoints in facade scan in the group UgCS
"Hi Mike, Currently such feature is not available for Facade scan. Best regards, UgCS Support Team Janis Jonins www.ugcs.com/support Video tutorials: YouTube.com/UgCStv Latest news: FB.com/SPHEngineering UgCS Wiki: wiki.ugcs.com"
May 31
Janis Jonins replied to Mike Sousa's discussion Exporting section of route from Telemetry in the group UgCS
"Hi Mike, Please, check file that you edited, most possible you have left/or deleted something that was necessary. Coordinates are in blocks, if you remove some part, complete block should be removed, whitespace characters also are important. Best…"
Apr 24
Janis Jonins replied to Mike Sousa's discussion Exporting section of route from Telemetry in the group UgCS
"Hi Mike, You can edit KML export in text editor, delete part of route. Import KML in to mission planner, some adjustments might be needed, but most part of route will be correct. Best regards, UgCS Support Team Janis…"
Apr 18

Profile Information

About Me:
UgCS Support Team
www.ugcs.com/support
Please tell us a bit about your UAV interest
Photography, agricultural use, surveillance, research
Hometown:
Riga

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service