Hi. to all... Usually I read a lot of information from the web but that time I'm making a contribution and posting some information that can help with a tech problem I found and solve and don't…Continue
"I don't think you can prevent that. You don't know what generate this malfunction.
You have to do an accelerometer calibration to see if they are working normally.
Maybe you have to load the last firmware update."
It's not needed to use google earth.
Mission planner on his Log analyzer can show the map and the drone trajectory side by side with the graph of the parameter you selected.
Then, double click on the graph on any point and it show the…"
I saw the logs. Looks like for some reason, the main accelerometer ACC1 stoped working at line 94.06 and then the stabiization sistem stopped too (see the RATE),and started to osscilate. The second accelerometer ACC2 worked fine but the…"
"Of course pushing the sensor to 3200 is not a good idea.
The QX10 is very very very similar to the wx220, wich is also automatic an laks manual modes.
and I take very nice shots with it with a hexa on windy conditions.
The sony OIS is one…"
I don't have that camera so .. no guarantee ;-)
The exposure time is too low and the ISO to.
Try increasing the ISO, or if you can use a "Sport Mode", normally they try to set the shutter speed as fast as posible.
I made some research .... I think that the functionality you ar asking for is present on te 3.3 FW. trough CH7/CH8 channels.
look this video.
Really nice feature
I don't think re-calib is necessary in your case, but just to be sure recalib it. It's easy and cost free ;-).
The magnetometer is the sensor that require to be far away from power wires and magnetics field. That's why…"
I built the quad using the Tarot 650-sport frame. See pic.
I am quite new to the drone-hobby, with very little RC flying experience,
in fact, this 650 is my first 'jump-in' :)) Fortunately, apart from my…"
Ouch !!! Sorry about your hard landing!! .... If it make you feel better .. I recently crashed my Tarot 680 hexa ...it looks like the battery was disconnected at 70m hi. It crashed really hard and It breaks one landing gear and 4…"
I have a M8N gps with Compass, assuming HMC5883L, which I use with my pixhawk FC.
Recently the quad landed sideways, result, the quad toppled-over :(
The GPS, mounted on stalk, bent 90degrees. I re-mounted the GPS,
"It´s true ... I made that for a Canon sx260 and it's working. But the canon need a positive pulse on the USB and the SONY a negative one on the wired shutter. Anyway it's working and I started to make mapps.