kevin zhou
  • Male
  • Bogota
  • Colombia
Share

Kevin zhou's Friends

  • Daniel Pacheco
  • Nate Miller
  • Rob_Lefebvre
  • Andrew Tridgell
  • Jaime Lopez
  • Mark Harrison
  • Christian Bodington

kevin zhou's Groups

 

kevin zhou's Page

Latest Activity

kevin zhou replied to kevin zhou's discussion a crash analyse in the group ArduPlane User Group
"Please someone do help....pixhawk, with APM I never have this problem..."
Jun 25, 2014
kevin zhou replied to kevin zhou's discussion a crash analyse in the group ArduPlane User Group
"Thanks for explanation. hope someone can help me to do some analysis on this issue. another is that GPS+compass module will be better than pixhawk on board compass ?"
Jun 20, 2014
Carl Davis replied to kevin zhou's discussion a crash analyse in the group ArduPlane User Group
"I wanted to look at the tlogs only so I didn't have graph in Excel. Dataflash log’s COMPASS message hold the compass’s raw x, y and z axis values (called MagX, MagY, MagZ) which are equivalent to the tlog’s RAW_IMU xmag, ymag…"
Jun 19, 2014
Carl Davis replied to kevin zhou's discussion a crash analyse in the group ArduPlane User Group
"Hi, I do not see the compass interference problems like those described at https://www.youtube.com/watch?v=4E0jKcuMRWA , but your problem sure resembles compass interference as described in the docs. Hopefully someone else can add some…"
Jun 19, 2014
kevin zhou replied to kevin zhou's discussion a crash analyse in the group ArduPlane User Group
"Thanks a lot for the help, I can not fly before I find out the reason. Here is the Tlog, just need to see from 90% of the log to the end. the beginning part is other flight before. I am using pixhawk onboard compass, I did not connect 3DR GPS…"
Jun 18, 2014
Carl Davis replied to kevin zhou's discussion a crash analyse in the group ArduPlane User Group
"Can you upload the flight's telemetry logs? This resembles the "toilet bowl" affect caused by compass interference."
Jun 18, 2014
kevin zhou commented on Scott Fuller's photo
Thumbnail

DF13 and I2C breakoff

"just found this post, mine have same problem, when i pull out one connector, the base get out, I think the cope is not is hard connect to the plastic base. "
Jun 17, 2014
m00se replied to kevin zhou's discussion a crash analyse in the group ArduPlane User Group
"I'm sorry to hear that, I have been watching the crash list of APM for a while before I invest in a new skywalker 2013 and fit APM in it, Its a shame to hear about so many crashes,  All (or most ) of the ones that I have seen seem to be…"
Jun 17, 2014
kevin zhou added a discussion to the group ArduPlane User Group
Thumbnail

a crash analyse

It was a horrible crash with pixhawk and my new airplane. I dont get the reason. airplane get into spin and no response, and it wass too far to make a manuel control. it crash to a golf club almost make big damage.Some one can help me with the log ?a crash bin logSee More
Jun 17, 2014
kevin zhou commented on Chris Anderson's blog post Just $1,000 to go (in one day) to get real lasers with LIDAR-Lite!
"integrate it with pixhawk........"
Mar 31, 2014
Parke @ ParkeFlyer replied to kevin zhou's discussion APM with dual RC control and mission control, is that possible? in the group ArduPlane User Group
"Not sure about the 100km range, but for the RC control, I would think about using a UHF system that supports "multimaster". Here is a post that accomplished what you are wanting at a somewhat shorter…"
Mar 4, 2014

Moderator
Dwgsparky replied to kevin zhou's discussion APM with dual RC control and mission control, is that possible? in the group ArduPlane User Group
"The ID I was refering to is in the 3DR Radio, its usually 1-999 and is set in the radio parameters to bind one radio to another, in your case the radios are far enough away from each other so it wont be a problem but they do need the same…"
Mar 4, 2014
kevin zhou replied to kevin zhou's discussion APM with dual RC control and mission control, is that possible? in the group ArduPlane User Group
"interesting, someone have been try that ? I guess two receiver and transimitter need to be same and config in same status."
Mar 4, 2014
kevin zhou replied to kevin zhou's discussion APM with dual RC control and mission control, is that possible? in the group ArduPlane User Group
"Thanks a lot, well, we work for some government project, so it is not a problem. for old style 35mhz,  it is hard to find a long rang solution now, especially dangerous for interference during the long range flight, I will see if some long…"
Mar 4, 2014

Moderator
Dwgsparky replied to kevin zhou's discussion APM with dual RC control and mission control, is that possible? in the group ArduPlane User Group
"you can do this but you will need to use a RC of the older traditional style as you will not be able to bind 2 transmitters of the 2.4Ghz style as the 2 Tx will have individual codes. the older style 35mhz simple use a frequency to match the TX and…"
Mar 4, 2014
kevin zhou added a discussion to the group ArduPlane User Group
Thumbnail

APM with dual RC control and mission control, is that possible?

Sorry, Let me make it more clear, in case of some long distance flight, I need two safety pilots, one in takeoff point with a RC controller to be able to make manual mode control, make sure take off safety and be sure that plane goes normally. Another safety pilot in a landing point 100 km far away from the takeoff point. to make sure plane arrive and land safety, maybe need to land in manual mode because it will be hard to calibrate the land level with that distance.1. Can I have 2 Mission…See More
Mar 4, 2014

Profile Information

About Me:
New flier, ZII, quadrones, fixwing. APM, Paparazzi.
Please tell us a bit about your UAV interest
for work
Hometown:
MIAMI

Comment Wall (2 comments)

At 11:01am on October 5, 2013, Jamie Glover said…
Hey Kevin, we have switched to APM and no longer use Paparazzi. Not sure Id be much help. Sorry about that, but I would definately find the paparazzi forum for alot of info on it and setup.
At 11:17am on October 16, 2013, Daniel Pacheco said…


Thanks Kevin im working in a new model of control pad with more options cause im gonna use APM for my multirotors and i need to add things like channels for TRL, Loiter and other stuff. 

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service