Gender
Male
About
Location
Niedergesteln
About Me:
I am From Switzerland :D
Please tell us a bit about your UAV interest
Photographie
Hometown:
Switzerland
Activity Feed
"2 Tons of steel and all for Gopro? :)"
"Hello,
My question just why Crash?
I Fly 2x Times high, after this slowly fly down and switch to ROTH ( Lose Video Signal) but the Ardupilot don't give throttle...
This is the Second Crash in RTH Mode! Many Times i test the RTH Mode and it…"
My question just why Crash?
I Fly 2x Times high, after this slowly fly down and switch to ROTH ( Lose Video Signal) but the Ardupilot don't give throttle...
This is the Second Crash in RTH Mode! Many Times i test the RTH Mode and it…"
"This Works very good! Thank you :)"
Hello Community, After a crash from 600 meters, i needed to rebuild my small Quadrocopter. it's based on:APM 2.0ESC: Mystery Blue Series 20A Flashed with WiiESCMotors: robbe roxxy 2827-35 (760kV)Props: Graupner E-Props 11x5 (to small for 3S Lipo i…
"Helo :)
Yes the Frame is from Quadframe SIXcopter. And it looks very good for the Money, i got a Talon Hexa Frame, but this are Bullxxxx, the arms are not stable in the Frame and vibrating under load.
Motors ePower 2217, maybe sold under brand…"
Yes the Frame is from Quadframe SIXcopter. And it looks very good for the Money, i got a Talon Hexa Frame, but this are Bullxxxx, the arms are not stable in the Frame and vibrating under load.
Motors ePower 2217, maybe sold under brand…"
Hello,After I Crash my Quadro, its time to build a new Hexacopter, but with much more Payload. ^^Carbon Frame290 Watt Motors 840KV20A ESC Flashed with newst SimonK12x4 Wood PropsAPM 2.0UBLOX LEA-6Build some Landinglegs :)Next Steps:LED LightingBuild…
"wats the direction of your APM ? i think its in the wrong direction ;)"
"Looks still good for a 600m Crash? ;)"
Hello,Yesterday I had a crash, my Quadro falls down from 600 meters. :(I fly with this copter many hours, never any Problem. Spektrum DX8 with SateliteUBec for APMAPM 2.0 Firmware 2.7.3uBlox LEA-6 I analyzed the log file and see I had signale lose…
"Hello,
I have a Quad like you but only 1.9Kg ;) 700KV motors 180W
I Fly with the Default settings, except Rate
P = 0,09
D = 0.02
I have tested many hours other values, but no big differences,,,"
I have a Quad like you but only 1.9Kg ;) 700KV motors 180W
I Fly with the Default settings, except Rate
P = 0,09
D = 0.02
I have tested many hours other values, but no big differences,,,"
Yesterday i got my LEA-6 GPS module and made a short comparison.I Placed my Copter outside on the street and wait 2-3 mins to get a good GPS Signal and then I running a track on the street with my copter over my head. First with Mediatek and after…
"Hello :)
With your Loiter settings i have the best settings ever! my copter hold the position with a radius of 2-3meters with light winds, but very stable, no overshots or something!
i have Mikrokopter Fram MK50, with 760kV Motors, 10 x 4,5 Props,…"
With your Loiter settings i have the best settings ever! my copter hold the position with a radius of 2-3meters with light winds, but very stable, no overshots or something!
i have Mikrokopter Fram MK50, with 760kV Motors, 10 x 4,5 Props,…"
"Hello,
I have the same Problem like you, and i have a DX8 too.... :/
But this error i have only 2and time! I fly now over 3-4hours with my new APM2.0 from the V2.4 -> 2.5.3, have no problems like this....
And i hope i dont have this "error" in…"
I have the same Problem like you, and i have a DX8 too.... :/
But this error i have only 2and time! I fly now over 3-4hours with my new APM2.0 from the V2.4 -> 2.5.3, have no problems like this....
And i hope i dont have this "error" in…"
"i have the same Problem since Yesterday :( 2 days my APM2 worked Fine, but now i have no power up on output rail."
