"It will switch to stabilize. But after a code review yesterday i did find that it will do that only if home position has not been stored (no GPS at arming time).
If GPS has been lost after home position had been set, then it will switch to RTL and…"
Assaf Weiss's Discussions
RTL climb altitude
Started this discussion. Last reply by Olivier ADLER May 27. 4 Replies 0 Likes
Hi all,In the manual it says that when RTL is switched on, the copter will climb to a minimum altitude 15m.Is 15m absolute, or is it relative to the home position where the copter was armed?Thanks.Continue
AC 2.6 on an APM 1280 board - accelerometer not leveled
Started Mar 3 0 Replies 0 Likes
Hi,I managed to upload the 2.6 code on the 1280 board I have via the Arduino IDE (not via the MP).It connects to the MP and It seems to be working (didn't connect motors or ESCs yet, only the board…Continue
AC 2.6 on an APM 1280 board
Started Mar 2 0 Replies 0 Likes
Hi,I managed to upload the 2.6 code on the 1280 board II have via the Arduino IDE (not via the MP).It connects to the MP and It seems to be working (didn't connect motors or ESCs yet, only the board…Continue
Latest arducopter firmware for APM1 1280 boaed
Started this discussion. Last reply by Lebdog Apr 3. 2 Replies 0 Likes
Hi,I didn't use the board for a long time and I want to reuse it.I tried updating the firmware via the latest mission planner, but couldn't succeed.I tried updating to AC 2.2 (which seems to be…Continue
Assaf Weiss's Page
Latest Activity
Roman Rempel replied to Assaf Weiss's discussion RTL climb altitude"what will happen to the copter, if during flight it did not work gps and set the mode switch to RTL?"
DeveloperOlivier ADLER replied to Assaf Weiss's discussion RTL climb altitude
"
It is relative to the home position altitude.
Be warned that home position is not always stored at arming. If GPS reception is poor, home position will be stored later as soon as the GPS will get a 3D Fix.
Olivier
"
Assaf Weiss posted a discussionRTL climb altitude
Hi all,In the manual it says that when RTL is switched on, the copter will climb to a minimum altitude 15m.Is 15m absolute, or is it relative to the home position where the copter was armed?Thanks.See More
Lebdog replied to Assaf Weiss's discussion Latest arducopter firmware for APM1 1280 boaed"What is the latest firmware you have gotten to upload, verify and connect with MAVLink properly if you don't mind me asking?? I have an APM1 board also I would like to upgrade to the latest stable firmware also.
Thanks, Caleb"
Assaf Weiss posted a discussionAC 2.6 on an APM 1280 board - accelerometer not leveled
Hi,I managed to upload the 2.6 code on the 1280 board I have via the Arduino IDE (not via the MP).It connects to the MP and It seems to be working (didn't connect motors or ESCs yet, only the board itself), but I have a weird thing happening I level the board, but in the flight data window in the hud window it shows that the board is not leveled (see attached image). When I load the latest arduplane version to the APM via the MP and connect to the MP, the hud shows it is leveled.Any idea why…See More
Assaf Weiss posted a discussionAC 2.6 on an APM 1280 board
Hi,I managed to upload the 2.6 code on the 1280 board II have via the Arduino IDE (not via the MP).It connects to the MP and It seems to be working (didn't connect motors or ESCs yet, only the board itself), but I have a weird thing happening I level the board, but in the flight data window in the hud window it shows that the board is not leveled (see attached image). When I load the latest arduplane version to the APM via the MP and connect to the MP, the hud shows it is leveled.Any idea why…See More
Assaf Weiss replied to Assaf Weiss's discussion Latest arducopter firmware for APM1 1280 boaed"Nevermind,
Got it..."
Assaf Weiss posted a discussionLatest arducopter firmware for APM1 1280 boaed
Hi,I didn't use the board for a long time and I want to reuse it.I tried updating the firmware via the latest mission planner, but couldn't succeed.I tried updating to AC 2.2 (which seems to be uploading fine) but I couldnt get the mission planner to connect to the board.Where can I find the latest working firmware that fits the above board? and can I upload it via mission planner or do I have to install IDE? and are there any known problems with the APM1 connection to the mission…See More
Assaf Weiss commented on Jan Sandvik's blog post 350$ 3d printer! Makibox a6"It doesnt look as if they will be able to ship early march...
the video linked is from early february, and it looks as if they are still strugling with the basic mechanism, not to mention full functionality of the machine..."
Andrew Radford replied to Assaf Weiss's discussion Mini quad - wont take off"Possibly. I have the same configuration, however use a 20C 800MaH. The problem may be the C rating of your battery.
The other issue I had was that I had to change the maximum PWM rate in the Multiwii code. The standard value was not high enough."
Assaf Weiss posted a discussionMini quad - wont take off
Hi all,I built a mini quad, it seems like it doesnt have enough power to take off.I used:4 of these motors :http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=53584 of these ECS's:http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=4318and a 360 mAh 7.2 volts LiPo for the meanwhole till I get a…See More
Assaf Weiss replied to Assaf Weiss's discussion APM MAVlink cant compile"Sorry mate, it was so long ago, I really cant seem to remember..."
David Fowler replied to Assaf Weiss's discussion APM MAVlink cant compile"I am having a simular problem, did you get this resolved, if so, what was the fix?
I have been researching on this, it seems like several are having similar issues that look like include paths. The answers so far are RTFM and/or…"
Assaf Weiss commented on giu's blog post MookaFrame: New 3D frame"3D printing this is a bad idea...
The majority of the materials (at least the affordable ones) used for 3D printing are very brittle and will not withstand the vibrations/impacts of a quadrotor."
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Andropilot Users Group
203 members
-
Moderators
24 members
-
ArduPlane User Group
720 members
-
ArduCopter User Group
1355 members
-
ArduRover User Group
207 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
