"I don’t know why, but only version 2.12 works in my case I have  2.24 , but can’t compiling after loading small program for cam. stab. I have changed contents  in library for version 2.24, no luck, created new folder library…"

"ok, is there any reason you are using ArduPlane 2.12? You will have lots of problems trying to use the current Mission Planner with an older version of ArduPlane...   For example, like not being able to setup / save the modes. Can you upgrade…"

"Mike I need just auto-stablize"

"@alex:   do you need to move the camera, have control over the camera, or do you just want it to auto-stablize? "

"Ok I use Planner and upload program for ArduPlane . All works fine. I can select modes for my 3 position switch all what I need, no problem All works fine  Ch ## 5 ,6 blank.   To activate Ch 5,6 for cam stabilization I use the Arduino…"

"Even though it looks like you have already gotten this help before"

"Are you using ArduPlane or ArduCopter? Because I think estebanflyer is talking about ArduCopter, which has basic camera stabilization turned on by default rather than ArduPlane, which has code to support stabilization, but it is not on by…"

"I tried it before.. Doesn't work   "check your values on Mission Planner," Ok I will. Will see.."

"To make it work you have to turn the APM off, connect your servos to ch5 and 6 and turn the APM back on. wait until the gyros are 'centered' (or something like that, you just gotta wait around 1 minute) and then move your APM or your whole…"

"OK, Thank you"

"Alex: when you say ArduPilot, I assume you mean ArduPlane? If so, we'll have all the camera stuff turned on by default soon--all the code is already written and working, as you can see. It's just a matter of integrating the commands into…"

"Thank you for link, but as I said, for me this is dark room...... Sorry about it Why you don't like create the  extra program for ArduPilot   For sample : ArduPilot with camera stabilization    We have already have…"

"Alex: I'm not sure what you mean. Camera stabilization is on by default in ArduCopter (and has been for many months), and the code for stabilization and even more sophisticated camera control in ArduPlane is right here. "

"I don't understand why manufacturer of autopilot don't want to create program for camera stabilisation I have 1 autopilot and will buy 2 more, but I need camera stabilisation. I am regular user. and haven't education of programming.…"

"I understand now, Thank you Estebanflyer Like Paul, im using the same turnigy setup and it confuses me "

"stabilization and cam control are tied together and work at the same time. stabilization will keep the camera stabilized, counter reacting the quad's flying attitude. If you connect a receiver to input ch6, you can change the camera's…"