Icebear's Friends

  • Daniel Svensson
  • Magnus
  • Poul Soegaard Nielsen
  • rad man
  • John Zaner
  • Carl Visagie
  • alison
  • Valery Hronusov
  • Jeffrey Johnson
 

icebear's Page

Latest Activity


T3
icebear commented on Chris Anderson's blog post PicoPilot stripdown
"I must add that the Picopilot is what hooked me to hobby UAVs in the first place so I still have a few in my UAV museum :). They work fine if used with electric motor glider type airframes, for which I think they were intended. Nowadays I prefer…"
Nov 25, 2013

Moderator
Mark Harrison commented on icebear's blog post The new Gluonpilot 2 has been launched...
Nov 18, 2012

T3
icebear commented on icebear's blog post The new Gluonpilot 2 has been launched...
"ramboky - thanks - you're right - now I know why both the AMP and Gluonpilot use the MPU6000! Still need to check out the APM sometime in the future though! :)"
Nov 18, 2012

T3
icebear commented on icebear's blog post The new Gluonpilot 2 has been launched...
"OK, thanks Chris for the insight of the MPU6000/6050 - I guess we'll have to ask Tom about his preference in using the 6000 with I2C interface... I guess I need to get check out the APM2 now also... :)"
Nov 17, 2012
Kabir commented on icebear's blog post The new Gluonpilot 2 has been launched...
"Thanks!"
Nov 17, 2012

3D Robotics
Chris Anderson commented on icebear's blog post The new Gluonpilot 2 has been launched...
"Mohammed: Yes, the chips are identical in all other respects. PX4 and APM use the MPU 6000 because it has the superior data interface, but both chips have the DMP. "
Nov 17, 2012
eduardo commented on icebear's blog post The new Gluonpilot 2 has been launched...
"Afff ... most people dont know anythink about sensors ! "
Nov 17, 2012
Kabir commented on icebear's blog post The new Gluonpilot 2 has been launched...
"Thanks for clearing my confusion Chris, but does the MPU 6000 have sensor fusion too?"
Nov 17, 2012

Profile Information

Hometown:
Helsingborg, Sweden

icebear's Videos

  • Add Videos
  • View All

Icebear's Blog


T3

The new Gluonpilot 2 has been launched...

Posted on November 16, 2012 at 11:20am 14 Comments

Yesterday I received one of the first updated Gluonpilot 2's from Tom Pycke in Belgium,

The Gluonpilot is an open source project created by Tom and the new GP2 is a completely new hardware design but firmware will run on both new and old Gluonpilots.

I have been flying the…

Continue

Comment Wall (11 comments)

At 5:35pm on July 20, 2007, Jeffrey Johnson said…
Hi Icebear, I noticed your new pics on RCForums from the Brahe hus - a swedish 17th century mansion. Can you link and geotag them on the pictearth site. I would really like to see exactly where this is :)

Jeff
At 10:16am on July 21, 2007,
T3
icebear
said…
Hi Jeff!
Sure, just back from vacation so I'll give it a try! It'll be a good lesson...
/Bjorn
At 11:52am on November 4, 2007, Jeffrey Johnson said…
HI Bjorn,

Would you be interested in betatesting some windows processing software with your GPS Tracks and Still photos? Chris is starting to test, and we just got some Finns up and running this weekend. The more the merrier.

The program only requires a normal windows install, the output from your GPS (nmea, gpx, csv) and your digital photos with EXIF (time taken etc). It will produce files for Google Earth that we can then process.

Let me know if you are up for this, Thx

Jeff
At 12:31pm on November 4, 2007,
T3
icebear
said…
Jeff,
Sure - I am up for it - thanks for asking. Would be really interesting!
Can you send more info via email?
icebear2@telia.com

Thanks,

Björn
At 10:00am on March 19, 2008, JLG said…
Hi Ice, can I get your set up for your videos (AttoPilot Beta test part III)?
Plane (with mods),Camera & AutoPilot gear?
At 11:43pm on March 21, 2008,
T3
icebear
said…
Sure,
Scorpio Miss2 (similar verion available from HobbyLobby), no mods other than a camera mount fitted to the side of the fuselage and the addition of the Atto + GPS.
Motor is an AXI 2212/34 with APC 9x6 slim prop. Will actually fly for 45 mins on a 3S-2000pack and the AUW is around 34 oz + camera (4.5 oz).

/Icebear
At 11:57pm on March 27, 2008, Edan said…
Icebear,
what kind of camera are you using? The video quality is really good. All recorded are are you transmitting?
Thanks,
Edan
At 2:48am on March 28, 2008,
T3
icebear
said…
Thanks Edan.
It is just a Pentax Optio s5z compact 5 MP digital cam. It has 640x480 video with DivX compression so you get 45 mins on a 1GB card. No downlink...
Icebear
At 10:22pm on June 24, 2008, avainy said…
Hi, I am so sorry to interrupt you. If you have some spare time, please visit our website. Our web has all kinds of RC helicopter, RC airplane in stock to meet various needs of RC hobby fans. I sincerely hope that you can find the things which you want to in our site. If you have any advice for us, please contact us. Thank you!
Our url is: http://www.rcroll.com
At 12:30pm on June 25, 2008,
T3
icebear
said…
No way, I don't like spam like that!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

© 2014   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service