Hello guys,
I have been working on my Ardupilot project now for over three months, and have run into many obstacles along the way. A lot of my problems were simply due to inexperience and were solved by help from many of you here on the forum.
Howeve
Read more…Using v1 shield, EM406, FMA sensors, no throttle connected the board, twin-boom plane, on FBW and Auto
Tried out this version for the first time today, two things I picked up on - my plane still seems to climb endlessly as there doesn't seem to be muc
Hi,
High Guys,
As total newbe, I started to understand sensors and programming Arduino in combination with Processing. So far I can read speed (precisely) with a 10 hpa (mbar) diff press sensor. This allows speed measuring up to 130 km/h. Temperature and
Read more…Ok. This is what I have setup. I have the arduIMU v2, the ftdi cable, and the newest ublox from the diy drones store. After I hook the gps up with the cable to the arduIMU and then power it all with the ftdi cable, then I run the labview and the util
Read more…Hi. hopefully someone can help me with assembly of
ArduStationn
i cant get my ground station to work/ turn on).
i have extra pieces left.
i get nothing on the LCD
no LCD power.
not sure what lights should turn on when i plug it in. but the red light is
Hi all,
Can someone help me with setting up the mode switch.
I'm using a MX22 with a spektrum module.
I have run the Radio tester and servos in nuetral position about 1500.
When I run the mode switch test, nothing happens. MUX led is always off.
STAT Led
Read more…I've been working on getting Ardupilot 2.6 working. I've never had any other Ardupilot load running on this particular board.
One strange thing I've found is that when I switch to any auto mode (RTL, AUTO, etc.) it seemed like the aircraft was captur
Read more…Hi,
I've been working with ArduPilot 2.6 load currently in the repository.
In my particular airframe, I need to reverse both the ailerons and the elevator, so in my header file, I have REVERSE_ROLL and REVERSE_PITCH both set to -1.
The FBW modes seem
Read more…What is the best hand held transmitter RC system compatible with spektrum AR6400 receiver ?
Read more…I know that some consider the predator/reaper to be an unstable platform, however, flight characteristics aside, I've been looking at http://www.nitroplanes.com/mq9.html the new 98" wingspan MQ-9. I'll be adding either a nano-itx pc (components strun
Read more…Ok I am confused.
pinMode(2,INPUT); // PD2 - INT0 - Rudder in - INPUT Rudder/Aileron pinMode(3,INPUT); // PD3 - INT1 - Elevator inRead more…
Hi
I am working on a ground control station software, but im having trouble finding some good maps. Thee best thing I have found so far is openstreetmap(http://www.openstreetmap.org/), but I would like a geographical land view version. What do people us
Read more…A board that provides configuration assistance for the combined use of ArdupIlot and Copilot II
Read more…Hi,
Does anyone out there know about this project?
Based on the sample data provided by Loris I have written some code to produce an Allan Variance plot of the data. The program source code is ISO C++98, and should compile with any standards-compliant compiler. G++ 4.4 tested, I expect MSVC 2k8 or hi
Read more…I am looking for some feedback as to how I plan to layout the essentials for my easy star. I will be adding video and a gumstix in front canopy. However, how I have it setup now it seems with my main battery adjustable under the wing I can move the c
Read more…