Hi all,
After flying, I wanted to download logs in my pixhawk with Mission Planner, but I got some errors like this:
//
Getting list of log files...
Error:System.Exception: Timeout on read - GetLogEntry
在 MissionPlanner.MAVLinkInterface.GetLog
I used to use channel 7 for autotune but I now have that for a shutter release so I programmed autotune as flight mode 4 which means going through positionhold first. Autotune wouldn't start so do you have to be in althold before going to autotune us
Read more…Hi there!
I know it's not the newest of all drones by all means anymore but maybe somebody on here is interested in taking mine off my hands.
I'm simply not using it as much as i'd hoped. Had it in the air for maybe 10 battery loads in total. It was al
Read more…Hi Guys, (newbie, so I welcome any corrections),
I am running Mission Planner 1.3.39 (last version that runs on XP) and Arduplane V3.3.0. Flying fine. I have two questions:
1) The "Load Presaved" button on the "Full Parameter List" and "Full Paramete
Read more…Recently I replaced my Arducopter with a pixhawk, I make all steps for calibrate. When I test the copter in field it becomes uncontrolable, I tried to fixed Loiter mode, but was unsuccessful,in the copter start to move right when all the sticks was
Read more…My Spyder 700 is pretty well set up but with a relatively heavy camera/gimbal set up on a relatively small diameter drone, with a 30mm lens on my Samsung NX300 I am noticing micro movements when filming which I would like to remove/reduce if possible
Read more…Hi,
I have a weird behavior in loiter/poshold.
When i'm loiter and I want to yaw my copter, it's drifting backwards for about 3-4 meters and than will slowly go back to it's position where it started from.
Doesn't matter if I yaw right or left. It alway
Read more…I am flying a Tarot 650 frame with a Pixhawk autopilot for some time now. I have autotuned it and it flies well. Since two weeks it flies "jerky". The motors de-/accelerates suddenly and the whole thing kind of jumps through the air. I can fly it, bu
Read more…I might be overstretching my abilities here, but when you put your transmitter through the calibration stage on mission planner, the PMW's seem to be fairly standard, i.e around 1100 at the bottom, 1500 for the middle setting on a 3 position switch,
Read more…I'm still testing/tuning my quad (680mm frame, 380Kv motors, 14.7in props) and I noticed something that is happening from time to time. It's not a voltage issue because I've got triple redundancy on the voltage supply along with the diode and capacit
Read more…Hello
Im trying to get an output from the gps but i believe the gps outputs 3.3 and the mega needs 5volt...
GPS is wired to port TX to arduino pin 19 and RX to 18
code is below
#include <TinyGPS++.h>
#include <SoftwareSerial.h>
/*
This example uses softwar
I make some sorting those days and I found this beautiful 6 ESC board, coming right from Germany.. I will never use it and I want to give someone the chance to build something with it !
Spécifications are really cool :
100% High power burn-in test incl
Read more…Hi,
weare new to the game, built a quadcopter using:
Frame: https://www.amazon.de/gp/product/B01531200S/ref=oh_aui_detailpage_o09_s01?ie=UTF8&psc=1
T-Motor 6th Anniversary Brushless Quadcopter Set 4x MN2213 4x Propeller
and
Read more…I'm using the PixFalcon on a mini-quad with the included power distribution board. I'm powering it with a Tattu 1800mAh 45C battery. Now the packaging says that the PDB has a battery monitor included on the board, but I have not been able to work out
Read more…Firstly let me say I am a newbie so bear with me. I have a Quanum Nova and use my own Tx (Taranis) and Rx (FrySky). Set up 6 flight modes using Mission Planner and have got them all working well even completed some missions on auto - very happy. Fitt
Read more…Hello,
It is my first attempt at building a compact (680 mm) multipurpose X8 aerial platform. The idea is to have a system that will go from using a GoPro 3 Black with a 3 axis gimbal to a mirrorless camera (Sony A7R) with a 3 axis gimbal. My current
