All Discussions (17288)
Sort by
3DR GPS Units For Sale
I have for sale 3 GPS units all used with the Ardupilot platforms and genuine from 3DR or Sparkfun.
The first photo is of a V2.0 3DR GPS MTK Unit. Includes 1 long length cable and 1 short length cable. Asking $25.00 shipped.
The second photo is of
How to limit elevator servo travel? (Pixhawk with Arduplane 3.4.0)
Hi
I have a plane which has the ability to perform a deep stall landing.
Due to this the elevator can be deflected quite far, which will initiate the deep stall.
I am trying to limit the servo travel for the Pixhawk - as the deep stall should only be in
Read more…ArduF1 - Go!
Oh come on, ardurover gotta give this a go :)
http://www.espn.co.uk/f1/story/_/id/14234559/formula-e-announces-driverless-car-support-series
Read more…3DR 850KV Motors
Please see my ad on RCGroups. http://www.rcgroups.com/forums/showthread.php?t=2550640
I have for sale 8 lightly used 3DR 850KV motors (these are the blue models). I am asking 12.00 a piece as the retail is 18.00 a piece and currently are hard to get a
Read more…Beagleboard XM Rev C
I have for sale a minimally used working Beagleboard XM Rev C. It also includes the original angstrom bootup sd card. Lastly, I will include the 5V adapter to power it up. This system can be configured to boot latest ubuntu editions and configured wi
Read more…LightWare SF10/x via I2C?
Help!!
Tried to connect as in the wiki, but no readings?
Do I have to change the I2C adress on the SF10/x, default 0x55?
Running APM:Copter V3.3.1.
Is it possible to see devices connected to the I2C bus?
Read more…Linux autopilot users -- Please help with postmortem
Hi all,
I recently converted my quadcopter from APM over to a Linux autopilot, running a recent version off the dev branch (802ced2). I'm running a Beaglebone Black using Mirko Denecke's PCB design, and followed his software setup instructions here,
Read more…No Gimbal Power
I have a Iris+ with a Tarot 2 Gimbal. I just replace the Pixhawk board, and updated my firmware the latest.
I was flying yesterday and Loiter mode was drifting towards a tree and the Iris took a hard landing.
Now the gimbal won't work. I have Green and
Read more…Arduplane Maximum Ground Speed
Is there any maximum operating ground speed for the Arduplane?
I know that the GPS is designed in such a way that it disables itself as soon as it crosses 500 m/s but I want to know if there are any operational limits due to the IMU or the processor w
Read more…Can the NEO-M8N be used with RTKLib?
As the title says, I've been trying to find out it the NEO-M8N can be used with RTKLib.
I've been looking around and it seems that it is unofficially supported.
I also found this: http://gpspp.sakura.ne.jp/paper2005/gpssymp_2014_ttaka.pdf
Thanks in adv
Read more…Cinestar Dual Purpose (HeavyLift / Long Endurance) Build Log
The main objective of this project is to build a dual purpose multirotor, able to fly heavy lift payloads for videography and lightweight cameras for aerial mapping.
We want to be able to fly different missions, with minimal part changes. To achieve t
Read more….net app for telemetry?
I have downloaded and built the source for Mission Planner in Visual Studio and I am immediately VERY overwhelmed. I am NOT a developer, but I can hack my way through things I want to build if I can get my hands on some example code.
SO, is there any
Read more…Arducopter 3.2.1 coup down with props
Hello
Does anybody know whether Arducopter has an algorythm of coming back to normal position, after the coup down with props?
Duly my octa, on tranzition from RTL to Stabilize, because of piot's mistake (gas was at the null) made a coup with props dow
Read more…
Drone Operation eXtension - dox
Dear all,
For those of you interested in the latest news of the drone industry please like our Facebook page, subscribe to our website, and have the chance to become our beta tester!
Thank you.
Nicolas
Read more…FAA registration task force final recommendations
The RTF (registration task force) ARC (aviation rule-making committee) has completed it's work.
Their final recommendations are posted here:
http://www.faa.gov/uas/publications/media/RTFARCFinalReport_11-21-15.pdf
(*warning*: science skills are requi
Read more…[HELP]ArduPlane no more Throttle after switch to any assisted mode
hi folks,
finishing my plane, and did some testing.
I am facing one issue regarding throttle.
In manual mode everything is fine, when i switch to stabilize mode, no more throttle, same for rtl.
am i missing something? first time it does that to me.
thxx f
Read more…Cant get elevator work in the right direction in stabilize mode
hi,
i am setting a new plane for some experimentations, and i am facing an issue i never had before using apm, that s why i am here on my knees asking your help.
ELE is on chan 1 works perfectly in manual mode, but goes wrong direction in stabilize or
Read more…2.4ghz remote relay
I am trying to create a 2.4ghz relay for a drone. The objective is to create a remote relay that can bounce (receive and retransmit) signals from a controller to a drone that's above the tops of trees. Anyone have a suggestion for the equipment, or a
Read more…Custom Flight Controller
I am a beginner, i want to add an RFID to my drone. After a long search, i did not find a kit having the drone with a flight controller that can communicate with an RFID.
So i thought about getting a drone kit without a flight controller, the kit that
Read more…