Hi,
how to reach Droneshare support? support@droneshare.com it seems not working.
My problem:
I have uploaded my mission to Droneshare
http://www.droneshare.com/vehicle/20516
But it doesn't appeared in public missions list and on the map.
Mission published
Hi, I'm coming back into RC after a 20 year hiatus, and see that FM transmitters are no longer in vogue. I'm building my own APM quadcopter, and to keep costs down planned on using my old Futaba Skysport 6A 72 MHz transmitter. In the long term I may
Read more…Here are some build pictures with a pixhawk and FPV gear:
http://marc.merlins.org/perso/rc/post_2015-08-15_BFG2600-FPV-build-with-Pixhawk-Ardupilot-3_3-_Diamond-2500-remake-from-Hobbyking_.html
My impressions of the BFG2600?
* It's a lot of plane for th
Hello.
I am need a third interface for HoTT telemetry.
Could this help?
nsh> mavlink start -d /dev/ttyS3 -b 57600
if so, how can i set this persistent?
Hi all,
I have an RTL-SDR dongle and I can't get it to work overlaying aircraft data in Mission Planner.
1/ I've installed the Driver into Windows 8 using Zadig
2/ I've run ADSBSharp using Port 47806 (& others)
3/ Checked the ADSB button in MP
Any suggest
Read more…Anyone running a DYS Gimbal with a Hero 2 ? It say in the literature that it will fit but mine doesn't seem to fit in the cradle.....
Thanks!
Dean
Read more…Dear All,
I have been searching the internet for a way to calibrate my ESCs without an RC transmitter. I was able to find two solutions:
1- Use the software available in the pixhawk: mission planner --> terminal --> connect to px4 --> type setup --> es
Hello,
as I keep progressing with my skills and my knowledge on the quadcopter world, I have a question.
At first I want to note that my quadcopter setup is:
DJI F450 frame
DJI E310 tuned propulsion kit ( 2312 motor, 420S ESC, 9450 props)
APM v2.8 flight
Sam, Have you considered adding a solar panel array as an accessory to the back of your field table. The panel could be used to recharge computer and phone batteries as well as flight packs.
Read more…Has anyone experimented with melding the philosophy, engineering, electronics and just pure fun of remotely piloted vehicles with UUVS ( Unmanned Underwater Vehicles ) like the OpenROV:
http://www.makershed.com/products/open-rov-
Read more…I am having a strange issue. The Internal compass on the pixhawk when I do the compass calibration does not move much. The first screen which is the external compass spins as expected and gives me proper offset values, however, the second screen (int
Read more…How long will it be before someone successfully operates a private / hobby UOSV ( Unmanned Outer Space Vehicle )
And, what would the propulsion system especially the propellers look like on a UAV working in the atmosphere of MARS ?
( The MARS atmospher
Read more…Is there some kind of device which guarantees Long range Connection?
Something with no latentcy.
Something like lightbridge of DJI.
Read more…Hello,
I'm looking for someone who can build something similar to this
http://diydrones.com/profiles/blogs/tir-tactical-inspection-robot
The height of the TIR should be around 1,5 cm with minimum battery autonomy of few minutes.
If interested we can disc
Read more…The following steps were taken to build a light-weight responsive 3-axis gimbal for the GoPro. I'll cover:
I Requirements
II Design
III Build
IV Test
V Performance
Background: The next duration ship needed to be a video and camera platform. The
Read more…Hi all,
I am designing a drone for using pixhawk and need to retrofit the external USB and LED for my own design.
So I draw schematics and circuit board for both USB and LEDs.
USB works just fine however LED circuit does not work as expected.
I tried t
Read more…I have an APM 2.6 with a broken USB connector that I now connect with using an FTDI adapter on UART0.
The problem is I'm unable to get the APM to allow firmware updates over that port.
Does anyone know of a workaround? Maybe a way to trick the APM int
Read more…I'm beginning a project to build an aircraft to map sections of the SF Bay for water quality monitoring. The aircraft needs to carry two gopros (one for visual, one IR) as far as possible. I have a lot of experience with pixhawks on quads but very li
Read more…Hi All
Having some stability issues on my D-130 X8
In light wind or (as today) in suspected thermals it gets very unstable Scary on a 10 000Usd rig!!
If I compare Roll des roll and Pitch Des pitch it has a big gap right betore i aborted the mission and
Read more…Is anyone out there experimenting with LIDAR as a collision avoidance system for UAVS ? I found some parts for this at: http://www.robotshop.com/en/leddartech-platform-sensor-evaluation-kit.html Am also looking for interfaces, probes anbd sensors
Read more…