Hello all, I want to know if this setup will take 3,5KG quadcopterand all stuff is great to go !
Motor x 4:Turnigy L3010B-1300 Brushless Motor (420w) ( 1670g/each ) Total 6600g
ESC x 4: TURNIGY TRUST 70A SBEC Brushless Speed Controller
battery x 4 : Tur
I have a simple question:
Do the dataflash logs measure and store my RC inputs (voltage/position information from my ailerons stick, rudder stick, and so forth on my transmitter) on board the Pixhawk? If so, can you please tell me where I can find the
Read more…I am trying to eliminate control surfaces on a fixed wing aircraft and replace them with motors. Hence, all maneuvers will be made using thrust vectoring.
I need help with converting the 'speed scaling function' to a 'throttle scaling function' for t
Read more…I have for sale a Sentera Phoenix. This is a fully autonomous drone with a dual sensor on the belly that shoots RGB and NIR simultaneously. Each sensor has a 64 GB sd card installed.
The plane is controlled by Virtual Cockpit software on the Dell
Read more…I am trying to geotag pictures using mission planner, but the date in the log is off by 2014.71 years. Is there a setting I am missing? I am using latest AC3.3rc10, and mission planner just updated itself to the latest. I have done this successfully
Read more…Hi
My quad is set to node 0 destination 65k
My ground station is set to node 1 destination 0
My AntennaTracker running on APM 2.6 is set to node 2 destination 0
I can connect to the Quad from mission planner but I am not seeing the AntennaTracker in miss
Read more…Hello World what do you think of my new Fpv Mini race quad design for 3D printer or top can be carbon fiber
Does anybody have this problem? Throttle failsafe always lands with Arducopter 3.2.1 no matter what the setting is, RTL or Continue Mission.
I have tested this several times by hovering and just shutting off my transmitter. The copter immediately la
Read more…Hi.
My octa on 3.2.1 fly pretty good, but I confused by accel X axis leve - it below 0 level and about -3. Is it normal?
Read more…
Joshua Johnson – CAD Drones LLC
Search the internet for videos using the phrases “Drone Crashes”, “Multirotor Crash”, “Drone Fails”, etc. You are bombarded with 100s if not 1000s of videos that show “toy grade” and “commercial grade” Unmanned Aircraft
Read more…To those of us in the Colorado Denver/Boulder area: I will be giving a talk "What's up? Drones: A Technology Overview" at the University of Colorado on September 30th. Will be great to meet in person fellow drone builders and flyers!
Anyone intereste
Read more…If interested, here are the details of how to build a high-performance and light weight gimbal for the GoPro.
http://diydrones.com/forum/topics/building-a-3-axis-gimbal-for-gopro
Even though the build is a 3-axis gimbal, for the GoPro I actually recomm
Read more…Hey Everyone,
I am trying to understand the variation between my channel input and output values
I am using Mission Planner 1.3.30 build 1.15648.36304 and ArduCopter V3.2. When I run the Channel in and channel out on the Mission Planner > Flight Data
Read more…I was testing out my rebuilt hexacopter today. I was just hovering in alt-hold mode when the hex yawed to the right then crashed.
Could someone help me with the log to try and figure out whats wrong?
fc:pixhawk
version:3.3-rc11
frame:300mm
battery:3000mah
Read more…Dear All,
Just setup a Tarot 680 Pro all calibrated, armed properly all motors spins and seems working perfectly but... It doesn't takeoff. It looks like thrust stucked at 25% (stabilize, althold or loiter...) no reaction pass over and no react to yaw
Read more…Hello.
I have tricopter with pixhawk fc. It is my first tricopter. I've already tuned 6 or 7 quads controlled by APM and everything was good. Roll and pitch pids are perfect, but i can't deal with yaw on my tricopter. It wobbles.
At first there was bac
Read more…Hi guys,
As I know, when you download firmware to the autopilot they are different versions for APM2 and Pixhawk, and I want to know if the source codes for APM2 and Pixhawk are also different?
Also I want to know when I download the firmware to Pixha
Read more…Hi guys, this is my first post and first let me say "Thanks" to this community being such a great resource. I have a question that I haven't been able to find an answer to regarding GCS Failsafe behavior.
The documentation says that the various GCS F
Read more…Hi there,
tried to "autotune" PIDs on my Pixhawk which is configured to drive a V-Tail Quad. The V-tail Quad flies quite ok already but sometimes it behaves a bit unstable/nervous in the air - that is especially when it's getting hit by wind gusts.
Th
Read more…
I happened to buy a mode switch from hobbyking. Received it today. I installed the switch on Flysky 9X. Took about 15 mins to install. The switch worked well in the very first attempt. The switch was installed on CH8 for arduplane. The setting of PWM
Read more…