Hello Everyone,
I have been using maytech 65amp ESCs on the multirotors for my team the last couple of years. However, I find that they do not properly sync to the same signal when using the Pixhawk. Has anyone had and overcome this issue?
Regards,
Dan
Read more…Dear all,I would like to build my first drone and I need some advice to chose the motors.My idea is to build an hexacopter with an empty weight of 2kg and a payload of 3kg, so I am looking for 6 motors with the right trust. I have seen the DJI E600 k
Read more…Hello everybody i made a simulink model to control a drone in x plane, and now i want to do a HIL (hardwar in the loop). i have an apm 2.6 card
Have you any idea how to do that
thanks
Read more…Good day guys !!
I feel the need to obtain the information from my PixHawk in my Graupner MZ-24 screen. I found
some threads talking about a change in arducopter firmware to run the telemetry, not good at messing original controller firmware.
Read more…
Then I f
I read with interest the discussion concerning the NEO-M8N in the 3.2 beta testing topic (~page 47 onwards). This has prompted a few questions if I may:
I'm using the 3DR uBlox GPS with my Pixhawk on my Sky Hero Spy with great effect, she's really dia
Read more…I'm would like to delve into the acquisition and analytics of UAS imagery. I have a great number of years in photogrammetry and remote sensing and have accomplished many projects acquired by manned aircraft. I would like to offer the opportunity to p
Read more…Has anyone tried a Canon EOS M with software from these guys http://www.magiclantern.fm
Read more…Hi Everybody,
I've been trying to change the OSD parameters and configuration on my MinimOSD board (and display on a Black Pearl Monitor) and haven't been able to make the connect. I've tried with both the 3DR radio transceiver and a USB-FTDI 3.3v ca
Read more…UAS Mappers,
I am considering building a UAS system for metric mapping. I'm looking for a reliable and stable platform that will collect imagery and positional data. I have the essential software programs for processing and analyzing acquired data. I
Read more…I have 2 APMs, one a genuine 3DR and one an RCTimer ArduFlyer. Both have been used with no problems on multiple multirotors within the last year or so. I moved on to PixHawk a few months ago which is what I've been mostly using but this week decided
Read more…Hi All,
I have a peculiar little problem with my 2 UAV's.
I have a lone ground radio that I can use for both machines. On the quad I use an On-the-Go cable with my Android tablet to connect and it works great.
The hex can use the same ground USB radio
Read more…We're a multi-disciplinary US-based group looking for an experienced drone designer/engineer to collaborate on a transformative technology toolbox project in Namibia. Experience in Namibia is essential. Please write to wildtrack.monitoring@gmail.com
Read more…I have built an octo which rolls to port on takeoff. I have checked the forums and can confirm;
1) ESCs calibrated.
2) ESC wiring checked ( Motor test)
3) All props have been checked for left/right hand
4) Have calibrated accelerometer 3 times.
5) Roll sa
Read more…I am following instructions on http://docs.megapirateng.com/documentation/tipsntricks to disable the internal compass on a Crius AIOP v2. The instructions say
Sometimes you want to use an external
Read more…After extensive researching I have concluded Mission Planner .kml flight paths and geotagging are generated using raw GPS data. We could have much cleaner, smoother, and more accurate flight paths if we used the IMU fused data. Any chance of getting
Read more…Solved
I was able to get the beeping to stop by setting my RC3_MIN to below 1140. I currently have it set at 1130 and have since adjusted my transmitter to make min throttle around 1100 and max around 1800 using the THR C/V.
I am still looking into wh
Read more…I'm stumped. Any help/suggestions is much appreciated.
I swapped out Pixhawk and GPS/Compass module into a new airframe. Same airframe, just new.
The motors are same, but new, as well as the ESC. The only other addition to the acft is a 12V regulator
Read more…Hello folks,
looking for a little help here,
I've been on the search to find a proper answer and the closet I have found is upgrading the firmware on my 9XR which is not possible at the moment as I don't have a programming card for the 9XR which from
Read more…Hi everyone!!
Today Pixhawk (latest Arduplane) rebooted twice. Once I heard it plaing music tones while it was in the air in Stab mode(lost connection with GCP had to land). And then second time while autotake off in Auto mode. https://youtu.be/vuOHnH
Read more…We’re very excited to have Amazon Prime Air confirmed as a sponsor for the upcoming Drones, Data X Conference www.nua.io
