I have a basic ground station setup as pictured below using 2 UNO5800 with circular polarized antennas. The video out goes to 2 separate EZCAP usb devices that are plugged into a laptop. No matter the software: VirtualDub, AMCap, Security Monitor(wor
Read more…Hi everyone!
Maybe I'm looking for info very bady, but I can not find information about the logs description. So.. Where I can find FULL information about all variables in Dataflash log with descryption? Mainly I need information about velocities and
Anyone (U.S. only) interested in starting a UAV/Aerospace business?
I already have a fixed wing airframe design.
Read more…Hi all,First off I'd like to say how great a resource DIY drones has been for my drone project. I'm in the process of building a fixed wing drone using the FX-61 phantom and Pixhawk.I've modified a Canon A 495 for NIR using the publiclab.org filter k
Read more…Hi
I had a frightening occurrence today where my 250-sized pixhawk / 3.2 quad suddenly started behaving very erratically in loiter mode -- rapidly gaining altitude.
After spending some time graphing dataflash logs, It seems that the issue began with an
Read more…Hi all,
I've built a ZMR250 based on mini APM 3.1. I'm using Multistar 2206 2150kv motors with Afro 12A ESCs and 6x2 carbon props. All the components are linked below.
The mini quad is flyable with stock PIDs and it actually loiters, RTHs, ... really w
Hi gang, I'm looking at building a new 3DR quad and see that the DIY Quad D Frame is out of stock and many European distributors are the same. Is this a sign that the 2015 frame is imminent (!!!) and I should hold off until an announcement or wait fo
Read more…Hello,
Would someone be able to figure out the actual volume of data which passesthrough the APM telemetry system during one hour of flight ?
I understand that the band capacity at 57600 bds / seconds is about 26 megaoctets in on hour. So that is the m
Read more…This arducopter came second hand with a wing I bought. When I was initially figuring it out I had it powered on with both the USB and battery which I eventually learned was a no no. It became unresponsive, and the computer wouldn't recognize that i
Read more…I have found that sometime when the unit powers up this port is dead.
How do I get this port to startup if it doesn't start?
I also want to hook up my own device to this port but it only outputs a heart beat message. How do I get it to output all of
Read more…What would cause the date to be wrong? How is the clock set?
ArduCopter 3.2 / Pixhawk
Thanks
andy
Read more…I have been flying the Skywalker X8, put all my gear into the FX79. My question: Can I us the X8 params and then goto Auto Tuning mode to Tune or do I need to install a Default settings and then Auto Tune?
Thx, any input will be appreciated.
Brian
Read more…Hi all,
I have been searching around and trying to figure out for about two days or so on how to get flight time estimation in Droidplanner (as we have in Mission Planner) as I would really need it for mapping task (we will be in the rainforest mappin
Read more…My apm, running 3.15 does a terrible twitch when switching from alt hold to loiter. Any ideas?This is destroying my video, as u get this jump.Both loiter and alt hold working well.Thanks in anticipation of help
Read more…#texts #pictures #bookmarks #links #videos
Ive put together a manual from the Arducopter wiki site for myself and would like to share with the community,
Can be used for offline use, easy printing and for those who build quads and sell them ((for the
Hello,
this is my first post here, so be gentle ;)
I have a setup where I'm using HM-TRP modules with Sik 1.9 firmware (downloaded with Silabs programmer). I also have a number of 433 modules from hobbyking, and a bunch of modules from 3DR.
I see some p
Read more…Is someone so kind to post his .param file for a 250 class quadri with apm, and give me some suggests for pid tuning?
thanx in advance.
Max
Read more…Hello
Is it possible to find the "param file" to use for Twinstar 2 or model almost like him
I would check my parameters
Thank you
Read more…Hi
After the "radio calibration" procedure is done I'm getting the message that channel 2,4,5 or 1.6.7…. "Failed to set channel x". Every calibration the error is in deferent channels. Only one time I didn’t get any error.
However, the channel PWM summ
Read more…Dear,
I really work on PixHawk autopilot Quad since a month:
- Quad Tarot 650
- ESC: Castle Creations 35 QuaPack (Bec Version)
- Motor T-Motor MT4006
- Autopilot: Pixhawk 3.2
- RC: Futaba 14SG
- Receiver: R7008SB
After all calibration successful my quad
Read more…