Gender
Male
About
Location
Vienna
About Me:
http://erikunger.com
Please tell us a bit about your UAV interest
Loving it
Hometown:
Vienna
Activity Feed
"A fixed camera distance that is smaller than the typical eye distance is IMHO not the best idea."
"It takes about 5 minutes to google what the problems of a tailsitter are. Interesting that the guys at Google didn't find out before starting the project ;-)"
"Also think you could crowdfund this!"
"I found the root cause: The Multistar ESCs are loosing sync with the Multistar motors (hello HobbyKing). No stuttering with Turnigy Plush. But those are slow at regulating RPM, so I am looking for fast ESCs that work with those motors."
"Nice. How do you digitize the video and what lag are you getting? My experiments with a USB video grabber showed a lag of 200ms."
"The bad sound of the motors is _because_ of the oscillations.
Regardless: I don't get them with props removed. So it has to be some resonance between the props and the Pixhawk coupled over flexing frame. Will have to stiffen the frame.…"
Regardless: I don't get them with props removed. So it has to be some resonance between the props and the Pixhawk coupled over flexing frame. Will have to stiffen the frame.…"
"Maybe this change?
ArduCopter 3.2-rc8 11-Sep-2014 Changes from 3.2-rc7 1) EKF reduced ripple to resolve copter motor pulsing"
ArduCopter 3.2-rc8 11-Sep-2014 Changes from 3.2-rc7 1) EKF reduced ripple to resolve copter motor pulsing"
"Would using an older firmware version fix the problem until rc10 is out?"
I am working on a 1.2m Quad with Pixhawk. First I had problems with the green Turnigy Multistar ESC, but after flashing SimonK they work very smooth and sensitive.Now the problem: When increasing yaw over 50% the two slower rotating motors start to…
"Hi, what does such a MoCap System cost?"
"3DR support says it's feature not a bug."
See video: https://www.youtube.com/watch?v=7byJNPC09FEMy setup: The APM Power Module does not power the motors, just the Pixhawk via the thin cables and it delivers 5V via an UBEC to the PWM output lane so that the OPTO ESCs get voltage. The motors…
"Egor it would be handy if you offer a mount with a range of typical eye distances and a way to adjust the focal point."
"So what goggles can be used for stereo display of those images?
Oculus Rift would be awesome, but it doesn't have analog in so it needs a fast analog-digital converter."
Oculus Rift would be awesome, but it doesn't have analog in so it needs a fast analog-digital converter."
"Wow, this is _really_ cool. Make it a Kickstarter project!"
