Hi,I am flying with arducopter in my multicopters more than 5 years, and this is the first time I can’t solve the problem by myself.The problem is: after 8 or 9 minutes flying in pos-hold mode, my quad start to drift in circles. And the circles are…
"much more than 2 minutes, always "No GPS" (when I use only the Rover ), but I will do the tests again in other place, I´m really close too big buildings , then I can ensure if is a problem or not.
I´m using Mission Planner. and upgrade drone and…"
"thanks, but when I on turn on the Drone + Rover stand alone (without the base) , I have "No GPS" status, thats why I asked. Kelly Schrock said:
You can, but not if you want RTK correction data to be sent to the vehicle. If you're not using the base…"
"Hi Greg,
Sorry about your crash....
I had problems with Qbrain in other platforms (32 bit boards.)
I spent one month to understand the problem….really hard….…. After more than 20 crashes, I simulated the problem on the ground …. With physical…"
The “ping-pong” between 2 GPSs is old (not a rc10 issue) ..... I don’t have the logs anymore, but from August I removed the second GPS from my Quadcopters…. The Crash is really difficult to happen, but happen in different conditions.…"