About

Gender

Male


Location

PARIS


Please tell us a bit about your UAV interest

I'm setting up an quad rotor to make aerial videos.


Hometown:

VOISINS LE BRETONNEUX


Activity Feed

Roque CANALES commented on Patrick Duffy's blog post How to setup a Mission Planner HD-Video HUD using GStreamer and Mission Planner plugins
"Hello Patrick I test your android App "QTGstreamer HUD" And I can't view the video that work on my windows laptop following gstreamer pipeline below:
gst-launch-1.0.exe rtspsrc location=rtspu://admin:admin@192.168.100.103:554/cam1/h264 latency=50 !…"
Aug 1, 2017
Roque CANALES replied to Sha Zhou's discussion Low Cost, High Performance RTK Module from Tersus
"@ Mickael OBORNE

Hello,  Could you please detail how to setup tersus bx305 for it be recognized as NOVA GPS ?
Michael Oborne said:
Hi guys,

I have access to the l1/l2 tersus boards, and have been evaluating them recently.
the ardupilot driver…"
Apr 21, 2017
Roque CANALES commented on Patrick Duffy's blog post How to setup a Mission Planner HD-Video HUD using GStreamer and Mission Planner plugins
"I use ezwifibroadcast, TX side pi3 and RX side pi3. I connected on TX side telem to rxtx of pi3.
So you tell me to install mavproxy on RX side Pi3?"
Mar 8, 2017
Roque CANALES commented on Patrick Duffy's blog post How to setup a Mission Planner HD-Video HUD using GStreamer and Mission Planner plugins
"@Patrick, Very good Job! I use ezwifibroadcast 1.4 and arducopter, but there's no explained how to use bidirectional telemetry and RX side UDP server for telem as you show on you video, could you show us how to?
On the wiki ezwifi there's no…"
Mar 7, 2017
Roque CANALES commented on Randy's blog post Copter-3.4 beta testing starts
"Great work Randy and all copter dev team!
Does EKF2 supports GPS and Optical flow fusion for strong positionning and flight security enhancement ?"
Jun 4, 2016
Roque CANALES commented on Randy's blog post Copter-3.3 released!
"Drone Crash due to GPS Glitch.....

Today reactions of drone when gps unconsistency occurs is max lean angle.....quick acceleration, high speed...
So beginers that fly at 20/30 meters of wall or tree, don't have reflex to toggle althold mode to…"
Oct 14, 2015
Roque CANALES replied to Randy's discussion ArduCopter-3.2 beta testing
"in this screen shot, flying in loiter, you can see thr out droping below 25% !"
Oct 24, 2014
Roque CANALES replied to Randy's discussion ArduCopter-3.2 beta testing
"Randy,

About landing detector, I know that it' s set to be threshold below 25% of throttle output...

I dispose an hexarotor with big motors that for hovering need 30% throttle output.

By time and for a short time, the drone drops below 30%…"
Oct 24, 2014
Roque CANALES replied to Randy's discussion ArduCopter-3.2 beta testing
"Randy,
Could you please tell about log détails regarding EKF and AHRS?
Also When arming whitout GPS, what home position drone take?"
Oct 14, 2014
Roque CANALES replied to Randy's discussion ArduCopter-3.2 beta testing
"Hello Randy,

About my upper report, please tell me if it's miss use from my part or if my repported issue could be considered as bug."
Oct 13, 2014
Roque CANALES replied to Randy's discussion ArduCopter-3.2 beta testing
"Randy,

Crash due to bug in GPS failsafe or Land mode or Geo Fence.
The log attached shows you a flight that I realized in specific conditions:
Takeoff in a valley where there was not GPS (sats 0). => Préarm check prevents arming the drone => I…"
Oct 13, 2014
Roque CANALES replied to Randy's discussion ArduCopter-3.2 beta testing
"When in loiter or alt hold, could auto-disarm routine invoke in this cases:
1. If drone need 20% throttle to hover => Thr In 50% and Thr Out 20% ?
2. for drone  that need 45% throtte to hover => If during flight pilot request max negative vertical…"
Oct 4, 2014
Roque CANALES replied to Randy's discussion ArduCopter-3.2 beta testing
"Is your pixhawk working properly after that? when you power pixhawk is FMU power led and B/E led working properly?
If not It seems to be a brownout !What bec and what current sensor you use?How have you connected gimbal?"
Oct 2, 2014
Roque CANALES replied to Randy's discussion ArduCopter-3.2 beta testing
"I watched your video, I'm pretty sure that your crash is due to synch problem with your motor esc or bad electric connexion of one motor /esc.

Could you please share your log?"
Sep 21, 2014
Roque CANALES replied to Randy's discussion ArduCopter-3.2 beta testing
"AC3.2 RC7 HEXAROTOR
I did several flights in auto mode, and I have two logs where the drone get disoriented along the way.
FYI the external magneto is positioned at the end of a mat of 15 cm and is not subject to any deviation due to magnetic field.…"
Sep 16, 2014
Roque CANALES replied to Randy's discussion ArduCopter-3.2 beta testing
"EKFCHECK_THRESH, it seems to me that the repeated errors from EKF regarding compass comes from the fact that few people (like me) don't make a "compass mot" to calibrate the Pixhawk built-in compass  .... because usually we use the compass…"
Aug 8, 2014
More…