"The new Firmaware Arducopter 2.6 and Arduplane 2.4 using Chip erase method to clear the dataflash.
Based on my reading on Datasheet of the flash chip, the manufactur (Atmel) mention that Chip erase has intermitent problem and they suggest to use…"
"Just had a crash on my quad. It was my buddy who fly it, we are tuning altitude hold. At the end of the flight the copter are uncontrolled.
I load 2.6 from mission planner and had few flight alright before the crash. Not a major damage only broken…"
"Initially I also though about loss of Thrust from the back motor, but if you guys look at properly, the CG is more to the front part, so we mount APM2 on the front side. I've look at Multiwii code and the vector ratio for Aileron and elevator is the…"
"I've done a code changes for this frame but don't have the frame to test.
From what I understand the changes is not much, its almost like a X quadcopter, differences are:
1. Front motors no longer involved in yaw movement
2. Back left motor will…"
"For those who tried to upload 2.6 delta by getting latest source from GIT, please empty your local copy first.
Yesterday I tried by getting latest and upload, and I got problem connecting to Mission Planner and also had some issue with DataFlash. So…"
For the past few days my log is not working anymore. When I try to pull the log it will shown the bellow:
ArduCopter V2.5.5] logs logs enabled: ATTITUDE_MED GPS PM CTUN NTUN CMD
Log -1791, start 1, end 1
Log -1790, start 1, …"
Hi, For the past few days my log is not working anymore. When I try to pull the log it will shown the bellow:ArduCopter V2.5.5] logs logs enabled: ATTITUDE_MED GPS PM CTUN NTUN CMD96 logsLog -1791, start 1, end 1Log -1790, start 1, end…
"Regarding Thottle glitch issue, I just made a flight test and encounter a glitch again. When I look at my log, I'm quite surprise with the Thr In graph of CTUN log. The thorttle is shown a glitch.
Also I analyse Roll IN of ATT log, there is 1 value…"
Hi, I'm trying APM2 on HK 450pro heli. I just did the test and the result, pitch and roll are alright, it was stable. The problem is with my yaw/rudder. I need to push my rudder to most right to make sure heli stays and basically I had no yaw…
"Wesley, I'm with you. I just sold my Quad and waiting for my hexa setup and now testing APM2 on my 450 Heli.
I mount the same way like you did. But yesterday I use your setting and I don't have yaw authority at all and heli is spinning.