Azjeg
  • Male
  • Budapest
  • Hungary
Share

Azjeg's Friends

  • Sanket Jain
  • Luca Spano
  • moriarty
  • Colin
  • KevinH
  • Kyle M
  • Falcon
  • Maxwell Tubman
  • Cassie Xia
  • Adam Kelly
  • Jinxing Zhang
  • RICE
  • Kira Hu
  • Sharon White
  • siyamand moloudnejad

Azjeg's Groups

 

Azjeg's Page

Latest Activity

Azjeg commented on Azjeg's blog post Light FPV GCS and payload controller, call for design input...
"You should look into Saiy or any other similar voice command application, because the above is already possible with Android tablet level hw. Because Saiy is now open source it may as well be easier to customise the code to this very purpose. As…"
Sep 28
Andreas Gazis commented on Azjeg's blog post Light FPV GCS and payload controller, call for design input...
"To tell you the truth, speech recognition will be such a breakthrough that I am afraid to even dream about it for fear of disappointment. Often, taking eyes off the model even for a second can be extremely inconvenient. Very recently, I spent…"
Sep 28
Azjeg commented on Azjeg's blog post Light FPV GCS and payload controller, call for design input...
"I don't think it's a dumb question, because voice command can be a viable alternative in certain UAV applications. Since it needs at least some embedded IT hw it may as well be an option in the 10" telemetry version, which is based on…"
Sep 27
Andreas Gazis commented on Azjeg's blog post Light FPV GCS and payload controller, call for design input...
"This is probably a dumb question but what is the current state of speech recognition? If a small subset of commands (the flight modes really, they only a handful) can be recognised by a relatively low powered processor, that would be a dream come…"
Sep 27
Azjeg commented on Azjeg's blog post Light FPV GCS and payload controller, call for design input...
"As many people have pointed out both rotary pots and sliders as important features, we have been looking into this in detail. It is possible to install two sliders on the top edge of the frame at the corners to be operated by your index finger. The…"
Sep 27
Edward Harevich commented on Azjeg's blog post Light FPV GCS and payload controller, call for design input...
"One of the things that stand out right away is the lack of slider switches.  Slider switches for me are key as I like to use pan and tilt on my cameras."
Sep 27
Azjeg commented on Azjeg's blog post Light FPV GCS and payload controller, call for design input...
"I have no worries about the ergonomy of the original design since we've been manufacturing it in small series for some time now. See here: RHH The "square" shape is a given with a monitor if we don't want to enlarge the footprint…"
Sep 12
Andreas Gazis commented on Azjeg's blog post Light FPV GCS and payload controller, call for design input...
"The reason I use 2-3 flight modes on the Tx is that it is easy to accomodate on most Txs. This is also why I never head to the field without a laptop, Tx alone just doesn't cut it. Personally would absolutely love to have at the very least…"
Sep 11
Riccardo Kuebler commented on Azjeg's blog post Light FPV GCS and payload controller, call for design input...
"Hello, at a first glance that looks nice. Directly to your questions: - adhering to a generic RC control would let most used pilots to feel at home, but hey, there's no reason to stick at that if reasons are good - can't understand what…"
Sep 11
Azjeg posted a blog post

Light FPV GCS and payload controller, call for design input...

Some of you may have already seen our rugged professional mission control units also presented here on DIYdrones. Most of those are produced to at least industrial IP specifications, but developers and DIYers are constantly bombarding us with requests for lighter and especially cheaper integrated solutions that would be at least…See More
Sep 11
Azjeg commented on Azjeg's blog post New rugged hand-held GCS with the ultimate modularity
"We're currently working on two LT versions of this RHH line with some kit and DIY opportunities for a change, and I'm going to post about it in a couple of weeks. We will need all your valuable input for the project, so check back then, or…"
Aug 12
Santosh Sharma commented on Azjeg's blog post New rugged hand-held GCS with the ultimate modularity
"I am also interested in it"
Aug 12
Azhar T. Pangesti commented on Azjeg's blog post UAV GCS design notes
"Wow!! Great writeup. I really enjoyed reading it."
Aug 10
Azjeg commented on Azjeg's blog post UAV GCS design notes
"You're welcome Mike, but I think we were also a bit behind the first line at the coal face. Everything important I've ever learnt in RF is from old hams, for example, and they are a dying breed, unfortunately. We also have to thank several…"
Aug 10
Mike Isted commented on Azjeg's blog post UAV GCS design notes
"Thanks for sharing this.  There's nothing more valuable than experience from those that have been working 'at the coal face', so to speak."
Aug 10

Moderator
Vladimir "Lazy" Khudyakov commented on Azjeg's blog post UAV GCS design notes
"Excellent!"
Aug 9

Profile Information

About Me:
The Mad Hungarian
Please tell us a bit about your UAV interest
Dabbling in rugged field gear...
Hometown:
Budapest

Azjeg's Photos

  • Add Photos
  • View All

Azjeg's Blog

Light FPV GCS and payload controller, call for design input...

Posted on September 11, 2018 at 10:24am 9 Comments

Some of you may have already seen our rugged professional mission control units also presented here on DIYdrones. Most of those are produced to at least industrial IP specifications, but developers and DIYers are constantly bombarding us with requests for lighter and especially cheaper integrated solutions that would…

Continue

UAV GCS design notes

Posted on August 9, 2018 at 5:31am 4 Comments

It’s probably time to provide some background to my blog posts on various ground control stations we’ve been designing and manufacturing, because our experiences over the years may give some food for thought for fellow UAV/USV developers.

Already in early 2010 it became clear that the multirotor…

Continue

New rugged hand-held GCS with the ultimate modularity

Posted on July 16, 2018 at 3:00pm 4 Comments

We have a new Android based fully rugged ground control station format for some serious UAV/USV work. We’ve been calling it simply the RHH, and it was developed with extensive modularity in mind from scratch. As the supporting and enthusiastic community of DIYdrones looks more and more like the primary meeting…

Continue

Compact Rugged Ground Control Station

Posted on December 2, 2017 at 9:56am 9 Comments

It's been a while since I posted write-ups or photos of any of our latest series or batch production models here, but this system has been available since March this year, so I'm not putting this out any further.…

Continue

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service