Hey guys, I want to connect my LidarLite v3 with a pixhawk. I used the configuration for the Lidar Lite v2 from ardupilot but it doesn't works. Can you please help me?Pd. I want to work with more…Continue
"Thanks all, I just connected the LIDAR through PWM. That seemed to work following the same steps as the v2 outlined in the ArduPilot documentation. Make sure your PWM rails are powered on the pixhawk if using this method! "
"I'm having no luck with either of my LidarLiteV3 with ArduCopter - I've tried everything I can find about getting it to work. I'm wondering if either you can advise / provide small guide on what you did to make it work.
"The parameter descriptions in mission planner sometimes are not up to date it seems. If you check the full parameter list here and check the RNGFNDR parameters you can see type 15 is for lidar lite V3."
"Late but worth adding. Had issues working out correct settings for mine too using I2C, but after getting some advice I set the RNGFND_TYPE parameter to 15 works straight away, address can be set to anything, it seems to be determined by the type…"
Hey guys, I want to connect my LidarLite v3 with a pixhawk. I used the configuration for the Lidar Lite v2 from ardupilot but it doesn't works. Can you please help me?Pd. I want to work with more than one lidar lite sensor at the same time.Thaks.See More
How is everything with you, I picked interest on you after going through your short profile and deemed it necessary to write you immediately. I have something very vital to disclose to you, but I found it difficult to express myself here, since it's a public site.Could you please get back to me on:( firstname.lastname@example.org ) for the full details.
Have a nice day
Thanks God bless.
No comments yet!
You need to be a member of DIY Drones to add comments!